00198374-04_UG_OSC_Package_R19-2_DE_EN.pdf - 第46页
46 Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019 Contents 4.4 New Features and Changes with R19-2 .. 81 4.4.1 Placement of Heavy Components with TwinHead Placement Heads .. 81
45Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019
Contents
Contents
1 Introduction.. 47
1.1 Brief description.. 47
1.2 General information.. 48
1.2.1 Legend.. 48
1.2.2 ASM on the World Wide Web.. 48
2 Scope of delivery.. 49
3 Prerequisites.. 51
3.1 Software Requirements.. 51
3.2 Hardware Requirements.. 51
4 Working with the OSC Features.. 53
4.1 Features Introduced with R16-2.. 53
4.1.1 Placement of Snap-In Components.. 53
4.1.1.1 Procedure.. 54
4.1.1.2 Application Example.. 54
4.1.2 Stereo Measurement for THT Pins.. 57
4.1.2.1 Procedure.. 58
4.1.2.2 Application Example.. 58
4.1.2.3 Tips and Tricks.. 60
4.1.3 Customer-specific Pattern Features.. 61
4.1.3.1 Procedure.. 61
4.1.3.2 Application Example.. 62
4.1.3.3 Tips and Tricks.. 63
4.1.4 Special Position Evaluation.. 64
4.1.4.1 Procedure.. 64
4.1.4.2 Application Example.. 65
4.1.5 Finding Best Acceleration.. 66
4.1.5.1 Procedure.. 66
4.1.5.2 Application Example.. 66
4.1.6 Increased Placement Force for Twin VHF Placement Head.. 70
4.2 New Features and Changes with R18-2.. 70
4.2.1 Placement of Snap-in Components – Improved Teaching.. 70
4.2.2 Stereo Measurement for Gullwings and Pattern Features.. 70
4.2.3 Stereo Measurement – Measurement Parameter 4x Image Capture.. 71
4.2.4 Placement of Components with Centering Pins – PininPaste Height Check.. 72
4.2.4.1 Procedure.. 73
4.2.4.2 Application Example.. 73
4.2.5 Automatic Illumination Optimization.. 75
4.2.5.1 Application Example.. 76
4.2.6 Placement of An Exceptionally High Component.. 76
4.2.6.1 Procedure.. 77
4.2.6.2 Application Example.. 78
4.2.7 Increased Placement Force for TwinHead Placement Head.. 78
4.3 New Features and Changes with R19-1.. 79
4.3.1 Placement of Exceptionally High Components.. 79
4.3.2 Component Chipping Inspection.. 80
4.3.3 Placement of Snap-in Components – Improved Teaching.. 81
1 Introduction
1.1 Brief description
Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019 47
1 Introduction
This guide gives an overview of the contents of the ASM OSC package. Here you will find all key
information needed for working with the features of the ASM OSC package.
1.1 Brief description
Components with irregular component shapes outside the standard range are referred to as Odd
Shape Components – (OSC). When handling odd shape components, the trend is going towards
increased automation in the placement line with the following target:
●
Reduce manufacturing costs
●
Maximize product quality by avoiding human error factors
●
Reduce manual workstations at the line, and thus optimize the floor size
From R16-2, SIPLACE supports new features for odd shape components that have been collected
into the licensed OSC Package option. This extends the range of components that can be as-
sembled by a SIPLACE machine.
The features supported by the OSC package have been successively extended. In the following
table, you can see which features have been introduced with which new software release.
Release New features, options and improvements
R16-2
●
Improved placement of snap-in components
●
Stereo Measurement for THT Pins
●
Customer-specific Pattern Features
●
Special position evaluation
●
Support for finding the best acceleration (can be set at the station only)
●
Increase of placement force on Twin VHF placement head to 100N
R18-2
●
Improved placement of components with centering pins with the CPP and Twin-
Head placement heads (Pin in Paste height check)
●
Improved teaching of snap-in components
●
Stereo measurement for Gullwing and Pattern Features lead group types
●
4x image capture measurement parameter in the stereo measurement
●
Automatic illumination optimization for Non-standard and Connector component
types
●
Placement of an exceptionally high component (1 use case)
●
Increase of placement force on TwinHead placement head to 30N
R19-1
●
Improved placement of exceptionally high components on TwinVHF and CPP
placement heads
●
Component chipping inspection
R19-2
●
Increase of component weight that can be placed with TwinVHF placement
head
A detailed description of the single features can be found in chapter 4 "Working with the OSC Fea-
tures" [}53].