00198374-04_UG_OSC_Package_R19-2_DE_EN.pdf - 第51页

3 Prerequisites 3.1 Software Requirements Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019 51 3 Prerequisites The necessary system requirements for the OSC Package correspond to the system requirements for SI…

100%1 / 84
2 Scope of delivery
50 Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019
3 Prerequisites
3.1 Software Requirements
Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019 51
3 Prerequisites
The necessary system requirements for the OSC Package correspond to the system requirements
for SIPLACEPro and are described in the SIPLACEPro Version Description, item no. [00198763-
xx].
3.1 Software Requirements
The following table lists the software requirements that must be met for the released features per
release.
Release Required software
For features of R16-2
●
SIPLACEPro version 14.0 or higher
●
Stationsoftware version 710.0 or higher
●
SIPLACEVision version 5.4.1 or higher
For features of R18-2
●
SIPLACEPro version 16.0 or higher
●
Stationsoftware version 712.0 or higher
●
SIPLACEVision version 5.6.1 or higher
For features of R19-1
●
SIPLACEPro version 16.1 or higher
●
Stationsoftware version 712.1 or higher
●
SIPLACEVision version 5.6.2 or higher
For features of R19-2
●
SIPLACEPro version 17.0 or higher
●
Stationsoftware version 713.0 or higher
●
SIPLACEVision version 5.7.1 or higher
3.2 Hardware Requirements
The following hardware requirements must be met for the released features of R16-2:
Function Hardware
Improved placement of snap-in components Placement heads: TwinVHF
Smart Pin Support is recommended
Stereo Measurement for THT Pins Placement heads: CPP, TH, THHF, TwinVHF
Camera types: SST33, SST25
Customer-specific Pattern Features Placement heads: All
Special position evaluation Placement heads: All
Support for finding the best acceleration Placement heads: All
Increased placement force on TwinVHF
placement head to 100N
Placement head: TwinVHF
Can only be used with function status -03!
Smart Pin Support is recommended
The following hardware requirements must be met for the released features of R18-2:
Function Hardware
Improved placement of components with
centering pins (Pin in Paste height check)
Placement heads: CPP, TH, TwinVHF
Smart Pin Support is recommended
Improved teaching of snap-in components Placement head: TwinVHF
Stereo measurement for Gullwing and Pat-
ternFeatures lead group types
Placement heads: CPP, TH, THHF, TwinVHF
Camera types: SST33, SST25
Measurement parameter 4x image capture
as option in the stereo measurement
Placement heads: CPP, TH, THHF, TwinVHF
Camera types: SST33, SST25
3 Prerequisites
3.2 Hardware Requirements
52 Bedienungsanleitung OSC Package User Guide OSC-Paket 11/2019
Function Hardware
Automatic illumination optimization for
Non‑standard and Connector component
types
Placement heads: All
Placement of an exceptionally high compo-
nent (1 use case)
Placement machine: SIPLACESXV2
Single conveyor
Placement head: only TwinVHF or
combination of TwinVHF and TwinVHF or
combination of TwinVHF and CPP in higher posi-
tion
One component of type SMT;
Height: max. 46mm
or
One component of type THT (e.g. Connector or In-
ductance);
Height: max. 46mm without protruding elements
which disappear into the board after placement
(e.g. centering pins), 50mm with protruding ele-
ments
Increased placement force on TwinHead
placement head to 30N (as for THHF)
Placement head: TH
Smart Pin Support is recommended
The following hardware requirements must be met for the released features of R19-1:
Function Hardware
Improved placement of exceptionally high
components with TwinVHF placement head
See hardware requirements for the released fea-
ture of R18-2 "Placement of an exceptionally high
component"
Improved placement of exceptionally high
components with CPP placement head
Placement head: CPP in high position
Maximum component height: 15.5mm
Component Chipping Inspection Component type: BareDie, BGA, CCGA, Chip,
Moulded, or Nonstandard
The following hardware requirements must be met for the released feature of R19-2:
Function Hardware
Increased component weight that can be
placed with TwinVHF placement
Placement head: TwinVHF Maximum
component weight: 240g Nozzle adapter
for Twin VHF, item no. [03149670‑xx]