00196771-01_IM_SSW_705_03_DE_EN.pdf - 第24页

Installation Manual, Station Software Version 705.03 02/2011 Edition 5 Inst alling the machine computer 5.1 Inst allation sequence See separate Installation Manuals for d etails on installing the Windows XP or Windows XP…

Installation Manual, Station Software Version 705.03 02/2011 Edition

4.3 Network configuration

Fig. 4-5: Network connections between the machine and SIPLACE Pro

In two-computer operation a separate private network (100 Mbit/s) is set up between the machine

computer and the Vision computer via a subnet mask.

Fixed IP addresses for the machine computer and the Vision computer can thus be assigned for all

SIPLACE machines. These IP addresses are not known outside the private network, for instance in the

SIPLACE LAN or customer LAN.

These IP addresses need not be further configured by the operator while the station software is being

installed.

23 of 58

Installation Manual, Station Software Version 705.03 02/2011 Edition

5 Installing the machine computer

5.1 Installation sequence

See separate Installation Manuals for details on installing the

Windows XP or Windows XP Embedded operating system (item

no. 00196151-xx and 00196737-xx respectively)

For details on calibrating the touchscreen, see section 5.2.3.

See section 5.3.

See section 5.4.

See section 5.4.7.

24 of 58

Installation Manual, Station Software Version 705.03 02/2011 Edition

5.2 Preparations for installing the software

5.2.1 Requirements

Requirements for installing the SIPLACE software and the Vision computer software:

- The Windows XP embedded operating system with Service Pack 2 must be installed on the

machine computer and in two-computer operation on the Vision computer (see "Installation Manual

Operating System Windows XP Embedded SP2 for 70x", item number 00196737-xx)

- The Windows XP Professional operating system with Service Pack 3 and all current hotfixes

(SIPLACE Hotfix CD) must be installed on the machine computer and in two-computer operation on the

Vision computer (see the Installation Manual for the Windows XP operating system, item number

00196151-xx).

Note:

The Windows XP Embedded operating system is only used for new installations. On

upgrading to station software version 704 or higher, there will be no operating system

change from Windows XP Professional to Windows XP Embedded.

Under Windows XP Professional the default Windows display settings have to be changed and the

touchscreen has to be calibrated. Under Windows XP Embedded only the touchscreen has to be

calibrated. You must be logged on as the Administrator

in order to be able to carry out this work.

25 of 58