00196771-01_IM_SSW_705_03_DE_EN.pdf - 第34页
Installation Manual, Station Software Version 705.03 02/2011 Edition 5.4.7 Finalizing the installation Note: The status only lists the programs that have just been installed. If, fo r instance, the current version of SIP…
Installation Manual, Station Software Version 705.03 02/2011 Edition
Note:
The following screen only appears if applications are open which use files which must be
updated during installation of SIPLACE.
Fig. 5-10: Open applications
→ Close the applications or processes listed here by using the Windows Task Manager and then click
the Retry button.
The installation program now installs additional programs on the machine computer.
33 of 58
Installation Manual, Station Software Version 705.03 02/2011 Edition
5.4.7 Finalizing the installation
Note:
The status only lists the programs that have just been installed. If, for instance, the current
version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
→ If you wish to read the log of the installation of any program, click the Ok (or Error) button next to the
name of the program. The Notepad is started and displays the appropriate file.
Fig. 5-11: Finalizing the installation
→ Click the Finish button.
Caution:
→ Wait a few seconds after you have clicked the Finish button, before you switch off
the computer / the machine!
As some installation steps are not performed until the end of the installation by the
InstallShield, the installation might otherwise be incomplete, what may cause problems during
further installations.
Optionally, you can now install the SIPLACE Smart GUI.
Caution:
In two-computer operation the Vision computer must also
be installed (see chapter 6)
before you shut down the machine computer, as the station will otherwise not boot
correctly due to version conflicts.
In one-computer operation the Vision computer software is automatically installed during
the station software installation.
34 of 58
Installation Manual, Station Software Version 705.03 02/2011 Edition
5.5 Installing SIPLACE Smart GUI
The SIPLACE Smart GUI can optionally be installed after the station software has been installed. If the
station software has not been installed first, a corresponding error message is displayed.
→ Insert the SILACE Smart GUI installation DVD in the drive. It is read in automatically.
Note:
If autostart has been disabled for the drive, you must start the installation manually from
the Windows Explorer.
→ Open the Explorer and start "SmartGUI.exe" under drive E by double clicking it.
The "SIPLACE Choice Center" dialog box is opened.
Fig. 5-12: "SIPLACE Choice Center" dialog box
→ Click the "Smart GUI for station computer" button.
Installation of the SIPLACE Smart GUI continues with the welcome screen.
35 of 58