00193697-01.pdf - 第50页

4 Switching the S IPLACE line on and off SI PLACE Sof tware Guide SR.504.xx 4.1 Switching on the SIPLACE line Issue 01/03 EN 50 4 Fig. 4.1 - 1 St arting SIPLA CE Pro 4.1.2 What to ch eck before switching on the s ta tion…

SIPLACE Software Guide SR.504.xx 4 Switching the SIPLACE line on and off

Issue 01/03 EN 4.1 Switching on the SIPLACE line

4 Switching the SIPLACE line on and

off

This chapter contains information about switching the SIPLACE line on and off. 4

4.1 Switching on the SIPLACE line

4.1.1 Starting the SIPLACE Pro programming system

Å Start SIPLACE Pro from the Windows NT Start menu:

Start --> Programs --> Siemens SIPLACE

Å Start SIPLACE Pro

by clicking the icon on your desktop.

The system then connects to SIPLACE Pro Server and opens up the SIPLACE Pro user interface.4

While you are waiting for the system to connect to the SIPLACE Pro Server you will see the fol-

lowing screen. 4

4 Switching the SIPLACE line on and off SIPLACE Software Guide SR.504.xx

4.1 Switching on the SIPLACE line Issue 01/03 EN

Fig. 4.1 - 1 Starting SIPLACE Pro

4.1.2 What to check before switching on the stations

CAUTION

Carry out the steps described below before switching on the stations. 4

Å Check to make sure that the stations are connected to both the power supply and to the com-

pressed air supply.

Å Carry out a visual inspection of the stations. In particular, make sure that there are no obstruc-

tions in the traveling range of the gantries.

Å Make sure that the z-axes of all heads are in the top end position.

Å Close the feeder covers and the protective covers.

Å Make sure that there is no diskette in the disk drive of the station computer.

SIPLACE Software Guide SR.504.xx 4 Switching the SIPLACE line on and off

Issue 01/03 EN 4.1 Switching on the SIPLACE line

4.1.3 Switching on the station / Starting the user interface of the station computer

program

CAUTION

Only switch on the station after on the SIPLACE Pro computer Line Control GUI was started and

a job was downloaded.

Now the reference run can be started. Otherwise, the station is "Waiting for a connection with

SIPLACE Pro”. 4

Å Switch on the station at the main switch and check to see if the manometer displays the re-

quired operating pressure after you have switched the station on.

The station computer software is loaded. If a SIPLACE Pro computer is connected and com-

munication is error-free, the Main view of the station computer user interface for the "Operator“

access level appears (see Fig. 4.1 - 2).

Fig. 4.1 - 2 Main view after loading the station computer software