00193697-01.pdf - 第54页

4 Switching the S IPLACE line on and off SI PLACE Sof tware Guide SR.504.xx 4.2 Switching off the SIPLACE line Issue 01/03 EN 54 4.2 Switching off the SIPLACE line CAUTION Before you switch off the lin e, AL W A YS make …

SIPLACE Software Guide SR.504.xx 4 Switching the SIPLACE line on and off

Issue 01/03 EN 4.1 Switching on the SIPLACE line

Fig. 4.1 - 3 "Switching on the SIPLACE line" flow chart

Nozzle check

If necessary, change

nozzle configuration

Test set-up

Set tracks to full

Tasks of the programming system

computer

Load panel data

Fiducials

OK?

Make settings on the machine

Download-Assistent

Check the set-up

(attach feeder modules)

Switch on

Wait for reference run

Track errors

Yes

Abort

placement

PCB to output conv.

Yes

Station computer

Bold type:

Italic type:

To be carried out by the

operator

Carried out or signaled

by the station

Confirm change over in the

download wizard

Wait for PCB

Introduce PCB

Press the Start button

4 Switching the SIPLACE line on and off SIPLACE Software Guide SR.504.xx

4.2 Switching off the SIPLACE line Issue 01/03 EN

4.2 Switching off the SIPLACE line

CAUTION

Before you switch off the line, ALWAYS make sure that: 4

– All placement operations on the stations have been completed

– The z-axis of all placement heads are in the top end position

– None of the placement heads still contain components

– All gantries have moved into the standby position

– The station computers have been properly shut down.

4.2.1 Switching off Siplace Pro (Windows)

Stop the production in Line Control GUI. Close Line Control GUI.

Å Select Item --> Exit from the SIPLACE Pro menu bar.

Å Close all other programs on the computer.

Å Select Shutdown from the Windows Start menu.

4.2.2 Switching off the stations

Proceed as follows to switch off the station: 4

Å Terminate all placement operations.

Å Check to make sure that the z-axes of all placement heads are in the top end position.

Å Check to see if there are components in the placement heads and, if necessary, remove.

Å If necessary, move all gantries to the waiting position with the help of the corresponding gantry

functions (see the user manual for your machine).

NOTE

Gantries are usually moved automatically to the waiting position. 4

Å Close down the station computer software by selecting Mode --> Shut down computer....

Å Now switch off the station at the main switch.

SIPLACE Software Guide SR.504.xx 5 Error information

Issue 01/03 EN 5.1 General

5 Error information

5.1 General

If errors occur during operations at the placement station, you can call up information about the

possible causes and ways of eliminating the error in question. 5

To do this click the

button to start the Help system for the station computer. 5

– The information displayed will always be related to the error that is currently displayed on

screen, and from which the Help system was called.

– You can find information about other errors using the help system index. Simply enter the num-

ber of the error you wish to find, and the system will call up the description that belongs to this

error.

5.2 Calling error information

If an error occurs during operation, the appropriate error message is displayed in red in the status

bar of the user interface. In the Error view, the icon for Error information is active (see

Fig. 5.2 - 1). 5

You use the

button to clear an error after the cause of the error has been eliminated. 5