00191374-04.pdf - 第96页
5 Single and Dual PCB Conv eyor Adjustment Instructions S IPLACE HS-50 5.6 Limit Switch and Proximity Switch Width Adjus tment Edition 12/00 96 /LPLW6ZLWFKDQG3UR[ LPLW\ 6ZLWFK : LG WK$GMXVW PHQ W Å Po siti…
Adjustment Instructions SIPLACE HS-50 5 Single and Dual PCB Conveyor
Edition 12/00 5.5 Adjustment of Transport Parallelism
95
NOTE
Due to limited accessibility, adjustments as described above can only be performed from one side
each.
Å Move the conveyor to 100 mm on one side.
Å Loosen the three screws and take out the disk of the pressure flange.
NOTE
Watch out for the annular spring; it might fall.
Å Hold on to the untightened spindle.
Å With the help of the spindle, move the conveyor on the opposite side, until you reach a distance
of 100 mm there as well.
Å Check, if the measures of the conveyor are by now identical on both sides.
Å In order to fix the spindle follow the same procedure, just the opposite way.
NOTE
Make sure that during the fixing of the spindle, the conveyor remains unmoved.
6,7(67
Å Use the conveyor functions, in order to test the conveyor width adjustment, .
5 Single and Dual PCB Conveyor Adjustment Instructions SIPLACE HS-50
5.6 Limit Switch and Proximity Switch Width Adjustment Edition 12/00
96
/LPLW6ZLWFKDQG3UR[LPLW\6ZLWFK:LGWK$GMXVW
PHQW
Å Position gantry 2 above the proximity switch.
Å Set a distance of 0.4 mm.
NOTE
Adjust the second conveyor the same way.
Adjustment Instructions SIPLACE HS-50 5 Single and Dual PCB Conveyor
Edition 12/00 5.6 Limit Switch and Proximity Switch Width Adjustment
97