DEK INFINITY USER MANUAL.pdf.pdf - 第253页

INFINITY ',163(& 7,21 02'8/( 29(59,(: Soft ware Ver sion 7 User Manual 8.13 V ision W indow The video monitor displays what the camera views, ( both board and stencil). A Region of Interest (ROI) box (re…

100%1 / 356
INFINIT
Y
',163(&7,21
02'8/(29(59,(:
8.12 User Manual Software Version 7
If no image files are available, the display defaults to a standard board size
representation of the product file being printed.
By utilizing the mouse control or touchscreen (if available), any area of the
board representation selected by the user roughly positions the camera to this
area. Fine positioning is then carried out by adjusting the X and Y scroll bars in
the vision window. Existing sites can easily be selected and adjusted using the
mouse control and touchscreen (if available).
NOTE
The vision window X and Y scroll bars are displayed only when movement of the
camera is allowed within GUI.
Site Colour Coding Sites displayed on the board representation are coloured according to their site
priority parameter setting, as detailed in the following table.
NOTE
The current selected site is displayed in black.
Operations Buttons The four operations buttons are sited underneath the representation of the board
and are used to perform functions on the board. These are:
• Open Image File - allows user to browse and select .bmp/.gbx image file.
• Zoom In - zooms in to sites on the board representation.
• Zoom Out - zooms out from sites on the board representation.
• Fiducial Positions - show/hides board fiducial positions.
List of Devices and
Sites
The list of devices and sites created are displayed in an expandable and
collapsible form.
By selecting a site in the list, the camera moves to that site position and the board
representation site is highlighted with a camera position icon.
By selecting a device in the list, the device list automatically expands to show
all sites within that device. The first site within the list is selected and the camera
moves to that site position, the board representation site is highlighted with a
camera position icon.
NOTE
In this instance a device itself can never be selected.
Site Parameters The site parameters window enables the user to view the editable parameters for
the current site selected.
NOTE
The parameters in this display are view only.
X and Y Site
Coordinates
The X and Y site coordinates display is the current position of the mouse pointer
on the board.
Site Priority Display Colour
Every Cycle
Green
General
Yellow
Not Inspected
Blue
INFINITY
',163(&7,21
02'8/(29(59,(:
Software Version 7 User Manual 8.13
Vision Window The video monitor displays what the camera views, (both board and stencil). A
Region of Interest (ROI) box (red outlined), representing the current boundary
of the site is superimposed on both stencil and board displays.
When movement of the camera is allowed within GUI, scroll bars are displayed
in the vision window to enable fine positioning of the camera unit during site
setup.
Figure 8-7 GUI 2Di Interface (Bitmap File Representation)
Item Description Item Description
1 Board Representation (.bmp or .gbx image file) 2 Inspection Site
3 Camera Position Icon 4 Inspection Site Parameters
5 Site List 6 Site Priority Guide
7 Site Y Coordinates (current mouse position) 8 Site X Coordinates (current mouse position)
9 Vision Window Y Scroll Bar (when available) 10 Vision Window X Scroll Bar (when available)
11 Show / Hide Fiducial Positions 12 Zoom Out on Board Representation
13 Zoom In on Board Representation 14 Open .bmp or .gbx Image file
INFINIT
Y
',163(&7,21
',163(&7,216(783
8.14 User Manual Software Version 7
2D INSPECTION SETUP
Preparation For 2D inspection functionality the machine requires 2D Inspection in set
preferences to be set to enabled. Carry out the following procedures:
Set Preferences 1. Select Maint.
2. Select Set Prefs.
3. Using the Next and Incr keys, set 2D Inspection to Enabled.
4. Select Exit. The message ‘Printer configuration data file saved’ is
displayed in the message prompt bar above the menu bar.
5. Select Exit.
Load Product File 1. Select Setup.
2. Select Load Data. The message ‘Use keyboard to action product search’
is displayed in the message prompt bar above the menu bar.
The Load Data File window appears.
3. Use the Left, Right, Up and Down keys to highlight a product file. If the
product to be setup is a new one, select an existing product file and modify
it, (Edit Data refers).
Run
Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
Calibrat
Pressure
Calibrat
Offset
Calibrat
Vision
House
Keeping
Set
Prefs
Diagnost
Tes t
Cycles
Exit
Next Previous Incr. Decr. Exit
Next Previous Incr. Decr. Exit
Calibrat
Pressure
Calibrat
Offset
Calibrat
Vision
House
Keeping
Set
Prefs
Diagnost
Tes t
Cycles
Exit
Run
Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Load
Rebuild
List
Left Right Up Down Exit