DEK INFINITY USER MANUAL.pdf.pdf - 第94页
INFINITY 0$&+,1( 352*5$ 00,1* 0(183$5$ 0(7(5 6 1.92 User Manual Software Versi on 7 Custom Screen This option allows user definable screen image positions. Selection of this parameter activates the Print Area Lengt…
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 7 User Manual 1.91
Image X
Justification
This parameter defines the position of the image about the Image X parameter.
The image can be left, right or centre justified about Image X. Options are:
Image Y
Justification
This parameter defines the position of the image about the Image Y parameter.
The image can be front, rear or centre justified about Image Y. Options are:
Barcode Y This parameter defines the dimension between the centre of the barcode to the
outer rear edge of the screen frame or adaptor.
Screen Adapter The type of screen adapter needed, if any, for the screen to be used for this
product.
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Screen Image The position of the image in the screen frame. Options are:
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Option Default
Left Centre
Right
Centre
Option Default
Front Centre
Rear
Centre
Minimum Maximum Increment Default
10.0mm Screen Length - 10.0mm 0.1mm 97.0mm
Options Available
None
255
Sanyo
Heraeus
20 X 20
12 X 12
Options Available Notes
Edge Justified Permitted for Sanyo and Fuji frames only
Centre Justified -
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.92 User Manual Software Version 7
Custom Screen This option allows user definable screen image positions. Selection of this
parameter activates the Print Area Length, Print Area Width and Distance To
Image. Options are:
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Distance to Image The meaning of this parameter varies, depending on whether an image is centre
or edge justified. For centre justified images, the dimension is the distance from
the outside rear of the screen frame to the centre of the image. For edge justified
images, the dimension is the distance from the outside rear of the screen frame
to the front edge of the board.
NOTE
This parameter field only appears if Custom Screen has been selected.
Print Area Length This is the maximum printable distance in the Y direction, ie the maximum
distance the squeegee can travel, front to back.
NOTE
This parameter field only appears if Custom Screen has been selected.
Print Area Width This is the maximum length of squeegee that could be fitted to the printer, taking
into account screen frame and the amount of mesh surrounding the mask. This
is also the maximum length of paste that can be dispensed.
NOTE
This parameter field only appears if Custom Screen has been selected.
Options Available
Enabled
Disabled
Minimum Maximum Increment
306.0mm 645.0mm 0.1mm
Minimum Maximum Increment
100.0mm 508.5mm 0.1mm
Minimum Maximum Increment
100.0mm 510.0mm 0.1mm
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 7 User Manual 1.93
Board Width This parameter sets the rail width for this particular product. It is also used to
set a default value for the print stroke, the clean screen, the board stop position
in the Y direction and the AutoFlex rows. The maximum value depends on the
screen type selected.
NOTE
With the remote board stop fitted the minimum is 119mm and the maximum is
508.5mm.
Board Length This parameter is used to set the default values for the board stop position in the
X direction, the paste dispensing area and the AutoFlex reset columns. The
maximum value depends on the type of screen selected.
NOTE
With the remote board stop fitted the minimum is 130mm and the maximum is
508mm. With the large board option the maximum is 620mm, although boards
of 644mm can be loaded.
Board Thickness This parameter is used by the machine to set correct vision and print heights.
Front Print Speed This parameter sets the speed across the screen when printing.
Minimum Maximum Increment
40.0mm 265 508.0mm 0.1mm
255 432.0mm
249 330.0mm
Fuji 460.0mm
Sanyo 284.0mm
Heraeus 344.0mm
Minimum Maximum Increment
50.0mm 265 510.0mm 0.1mm
255 460.0mm
249 430.0mm
Fuji 460.0mm
Sanyo 420.0mm
Heraeus 344.0mm
Minimum Maximum Increment
0.20mm 6.00mm 0.1mm
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec