DEK INFINITY USER MANUAL.pdf.pdf - 第59页
INFINITY 0$&+,1 (352*5 $00,1* 67$*( ()2 50)/(;722/,1 * Soft ware Ver sion 7 User Manual 1.57 28. W ait until the pneumatic indicator on the front cover displays green. 29. Remove t he weights and the FormFlex …
INFINITY
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.56 User Manual Software Version 7
25.Place the FormFlex setup plate centrally over the tooling modules and rails
and place the weights on top of the setup plate.
26.Align the weights along the centre line in the Y axis and one third of the plate
length in the X axis.
27.Press the operator switch on the front of the machine covers.
C/L
1/3
1/3
BoardSetup Plate Weight (in 2 positions)
INFINITY
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 7 User Manual 1.57
28.Wait until the pneumatic indicator on the front cover displays green.
29.Remove the weights and the FormFlex setup plate from the tooling area.
30.Select Lower Head (F2).
31.Remove the head prop.
32.Select Confirm (F1).
33.Lower the printhead using two button control.
34.Close the front printhead cover.
35.Press the System button.
36.Select Home Position (F7).
37.Select Raise Head (F2).
38.Raise the printhead using two button control.
39.Fit the head prop.
40.Press Confirm (F1).
41.Select Board Clamps (F3) to open the clamps.
Adjust
Lower
Head
Board
Clamps
Set
Stop
Confirm Cancel
Raise
Head
Home
Position
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
INFINITY
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.58 User Manual Software Version 7
42.Remove the board from the rails.
43.Select Lower Head (F2).
44.Remove the head prop.
45.Select Confirm (F1).
46.Lower the printhead using two button control.
47.Close the front printhead cover.
48.Press the System button.
49.Select Exit (F8).
50.Select Exit (F8).
Adjust
Lower
Head
Board
Clamps
Set
Stop
Confirm Cancel
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit