DEK INFINITY USER MANUAL.pdf.pdf - 第96页
INFINITY 0$&+,1( 352*5$ 00,1* 0(183$5$ 0(7(5 6 1.94 User Manual Software Versi on 7 Rear Print Speed This parameter sets the speed acr oss the screen when printing. Flood Speed This Parameter sets the flood blade s…
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 7 User Manual 1.93
Board Width This parameter sets the rail width for this particular product. It is also used to
set a default value for the print stroke, the clean screen, the board stop position
in the Y direction and the AutoFlex rows. The maximum value depends on the
screen type selected.
NOTE
With the remote board stop fitted the minimum is 119mm and the maximum is
508.5mm.
Board Length This parameter is used to set the default values for the board stop position in the
X direction, the paste dispensing area and the AutoFlex reset columns. The
maximum value depends on the type of screen selected.
NOTE
With the remote board stop fitted the minimum is 130mm and the maximum is
508mm. With the large board option the maximum is 620mm, although boards
of 644mm can be loaded.
Board Thickness This parameter is used by the machine to set correct vision and print heights.
Front Print Speed This parameter sets the speed across the screen when printing.
Minimum Maximum Increment
40.0mm 265 508.0mm 0.1mm
255 432.0mm
249 330.0mm
Fuji 460.0mm
Sanyo 284.0mm
Heraeus 344.0mm
Minimum Maximum Increment
50.0mm 265 510.0mm 0.1mm
255 460.0mm
249 430.0mm
Fuji 460.0mm
Sanyo 420.0mm
Heraeus 344.0mm
Minimum Maximum Increment
0.20mm 6.00mm 0.1mm
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.94 User Manual Software Version 7
Rear Print Speed This parameter sets the speed across the screen when printing.
Flood Speed This Parameter sets the flood blade speed across the screen when performing a
flood stroke.
Print Front Limit This determines the distance from the front edge of the board that printing must
start.
NOTE
With Paste Trails enabled or ProFlow fitted the minimum value is 0mm.
Print Rear Limit This determines the distance from the rear edge of the board that printing must
start.
NOTE
With Paste Trails enabled or ProFlow fitted the minimum value is 0mm.
Front Pressure This parameter sets the force applied by the front squeegee during its print
stroke.
Rear Pressure This parameter sets the force applied by the rear squeegee during its print stroke.
Flood Height This parameter sets the height of the flood blade above the screen during a flood
stroke.
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
Minimum Maximum Increment
10.0mm/sec 150.0mm/sec 1.0mm/sec
Minimum Maximum Increment Default
-6.5mm Board Width - print rear limit 0.1mm 0.0mm
Minimum Maximum Increment Default
-6.5mm Board Width - print front limit 0.1mm 0.0mm
Minimum Maximum Increment
0.0Kg 20.0Kg 0.2Kg
Minimum Maximum Increment
0.0Kg 20.0Kg 0.2Kg
Minimum Maximum Increment
0.0mm 5.0mm 0.02mm
INFINITY
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 7 User Manual 1.95
ProFlow Knead
Pressure
This parameter sets the pressure to be applied, while using ProFlow, when
kneading in either direction.
Knead Off-image This parameter sets whether ProFlow is to knead in an off-image area of the
stencil. Options are:
Knead Before
Printing
This parameter sets ProFlow to knead before printing the first board and the
amount of boards to be printed between kneading.
NOTE
This parameter is only displayed if Knead Off-image is set to enabled.
Stencil Protection This parameter sets whether tooling to support the stencil, outside the board and
clamp envelopes, is in use. Options are:
NOTE
This parameter is only displayed while ProFlow is fitted.
Print Gap This parameter sets the gap required between the screen and board to be printed
during the print stroke.
Underside
Clearance
This parameter determines the clearance provided between the underside of the
board and the top of the machine tooling to allow for components on the
underside of the board.
Minimum Maximum Increment Default
0.0Kg 20.0Kg 0.2Kg 10.0Kg
Options Available Default
Enabled Enabled
Disabled
Minimum Maximum Increment Default
0
(disables knead before printing)
100 1 0
Options Available Default
On On
Off
Minimum Maximum Increment
0.0mm 6.0mm 0.025mm
Minimum Maximum Increment Default
3.0mm 42.0mm 0.1mm 19.0mm