4OM-1505-004_w.pdf - 第101页

4OM-1505 1-50 4. Maintenance Method : Chap.1 (1 1) Press the [Paper Feed (take-up)] button in the "CLEANING" window and press the [ST AR T] button on the operation panel to roll the paper once around the roller…

100%1 / 181
4OM-1505
1-49
4. Maintenance Method : Chap.1
(9) Set the roller on the feed (take-up) side, supporting it so that the left adaptor
can be inserted into the hole on the left side of the cleaning unit. Set it up
by pressing the roller against the left adaptor and aligning the right ange
groove with the right adaptor.
F4A46
(10) Attach the paper end securely to the roll core on the feed (take-up) side,
using a gummed cloth tape.
Roll Core Shaft
Gummed Cloth Tape, etc.
Paper Side End
F4A47
Note
To prevent the paper from being taken up diagonally, the paper side end must be
secured at right angles to the roll core shaft.
1002-002
4OM-1505
1-50
4. Maintenance Method : Chap.1
(11) Press the [Paper Feed (take-up)] button in the "CLEANING" window and
press the [START] button on the operation panel to roll the paper once
around the roller shaft.
F4A48
1002-002
4OM-1505
1-51
4. Maintenance Method : Chap.1
4.4 Replenishment of Industrial Alcohol
CAUTION
Be sure to turn off the power supply to the machine before
work.
Only the person in charge of maintenance should perform
this work.
DANGER
With the exception of industrial use alcohol, do not
use cleaning solvents.
In particular, be sure not to use gasoline by mistake
as it is highly ammable.
Reference
Refer to "1.2.1 Preparation for Cleaning" for the kinds of industrial alcohol.
CAUTION
Industrial alcohol is likely to ignite if spilt within the
machine.
•
Do not put the industrial alcohol on the machine.
Otherwise, you may spill the alcohol by mistake,
causing it to ow into the inside of the machine.
•
Do not put the industrial alcohol nor the
replenishment container inside the machine.
•
Be sure not to perform replenishment work (supplying
the replenishment container with industrial alcohol)
in the machine.
•
Do not spill industrial alcohol outside the solvent tank
during the replenishment work.
•
If you have spilt solvent by mistake, clean it up with a
rag as soon as possible.
•
After cleaning up the spilt solvent, conrm that it has
dried completely and enough ventilation is provided.
After that, turn on the power switch of the machine.
0906-001