4OM-1505-004_w.pdf - 第107页

4OM-1505 1-56 4. Maintenance Method : Chap.1 Procedure (1) Press the [Cleaning Chg. Pos. Move] button in the "CLEANING" window . (The button ashes in green.) (2) Press the [ST AR T] button on the operation pan…

4OM-1505

1-55

4. Maintenance Method : Chap.1

4.6 Cleaning Procedure of Cleaning Unit

CAUTION

Press the cover lock switch to open the transparent

covers and then perform the operation.

Only the person in charge of maintenance should

perform this operation.

F4A52

1002-002

Graphic

Development

4OM-1505

1-56

4. Maintenance Method : Chap.1

Procedure

(1) Press the [Cleaning Chg. Pos. Move] button in the "CLEANING" window.

(The button ashes in green.)

(2) Press the [START] button on the operation panel while the button is ashing,

and move the PEC recognition section and stencil holder to the rear of the

machine.

(3) Press the Cover Lock switch on the front of the machine and open the

transparent cover on the front of the machine.

(4) Clean the cleaning nozzle.

Cleaning Nozzle

F4A53

1002-002

4OM-1505

1-57

4. Maintenance Method : Chap.1

4.7 Cleaning Procedure for the PCB Warpage Top Holder

(Plunger End Section)

Procedure

(1) Press the [Control] button in the common menu.

F4A52-1

(2) Press the [All Zero] button in the window and within 10 seconds, press the

[START] button on the operation panel. (The PEC recognition unit will move

to the rear section).

Note

While the automatic operation is stopped, the PEC recognition unit is in

the stand-by mode on the rear side, so the zeroing operation is not required.

(3) Move to the rear side of the machine.

(4) Press the cover lock switch on the rear side of the machine and open the

transparent covers.

1002-001