4OM-1505-004_w.pdf - 第63页

4OM-1505 1-12 2. Maintenance Check List : Chap.1 2.2 W eekly Maintenance Object Units Inspection, Cleaning, and Lubrication Spots Work Grease Required Tools Check 3.2.1 Air Source Drain Cleaning - Container, etc. 3.2.4 P…

100%1 / 181
4OM-1505
1-11
2. Maintenance Check List : Chap.1
WARNING
As industrial alcohol is ammable, be sure to keep it
away from any possible sources of re as it is likely
to ignite and start a re.
•
Keep industrial alcohol away from any heat of re.
•
Avoid smoking and using re when near the device.
CAUTION
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to
wear protective equipment (gloves and apron, etc.) to
protect against spills on exposed skin.
•
Whenever solder paste has adhered to your skin,
immediately remove it with lukewarm water mixed
with a cleaning detergent.
Notice
For industrial alcohol (solvent), use T4A1 alcohol.
0906-001
4OM-1505
1-12
2. Maintenance Check List : Chap.1
2.2 Weekly Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Tools Check
3.2.1
Air Source
Drain Cleaning - Container, etc.
3.2.4
PEC Recognition
Section
PCB Warpage Top Holder
(Plunger Front End
Section)
Cleaning - Rag
PCB Stopper Cleaning - Rag
3.2.6
PCB Chuck Section
Upper Surface and Pin
Hole Section of Backup
Table
Cleaning - Vacuum Cleaner
T4A7
0906-001
4OM-1505
1-13
2. Maintenance Check List : Chap.1
2.3 Monthly Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Tools Check
3.2.2
Squeegee Head
Section
Recognition Lighting
Glass Surface
Cleaning - Air Blow Brush for
Camera
Squeegeee Head
Y-Axis Linear Guide
(Left Side), (Right Side)
Cleaning - Oiled Rag
Stencil Recognition
X-Axis Linear Guide
Cleaning - Oiled Rag
Guide Bushing for
Squeegee Up/Down
Movement
Cleaning - Oiled Rag
3.2.3
Stencil Holder Section
Stencil Y-Axis
Linear Guide
Cleaning - Oiled Rag
3.2.4
PEC Recognition
Section
Recognition Lighting
Glass Surface
Cleaning - Air Blow Brush for
Camera
X-Axis Linear Guide Cleaning - Oiled Rag
Y-Axis Linear Guide Cleaning - Oiled Rag
3.2.5
Conveyor Section
Linear Guide for L
Conveyor Width Change
Cleaning - Oiled Rag
Linear Guide for R
Conveyor Width Change
Cleaning - Oiled Rag
3.2.6
PCB Chuck Section
Backup Table Z-Axis
Guide Bushing
Cleaning - Oiled Rag
Linear Guide for Chute
Width Adjustment
(Left Side), (Right Side)
Cleaning - Oiled Rag
Linear Guide for
PCB Clamping
Cleaning - Oiled Rag
3.2.7
Table Section
Table X-Axis
Linear Guide
Cleaning - Oiled Rag
Table Z-Axis
Guide Bushing
Cleaning - Oiled Rag
Table θ-Axis
Linear Guide
Cleaning - Oiled Rag
3.2.8
Cleaning Section
Cleaning Nozzle Cleaning - SOLMIX
Rag
T4A8
0906-001