4OM-1505-004_w.pdf - 第61页
4OM-1505 1-10 2. Maintenance Check List : Chap.1 2. Maintenance Check List The periodic maintenance items (inspection, cleaning, lubrication, etc.) are classied and described based on how frequently each item should be …
4OM-1505
1-9
1. Outline of Maintenance : Chap.1
Device Name
Inspection, Cleaning, and
Lubricating Spots
Work
Maintenance Cycle
Daily
Weekly
Monthly
Every 3
Months
Every 6
Months
5 Years
3.2.9
Transparent Cover Section
Front Transparent Cover
Hinge Part
Lubrication
Rear Transparent Cover
Hinge Part
Lubrication
Gas Damper (Four Places)
Lubrication
3.2.10
Blower Unit
Vacuum Filter Cleaning
0906-001
4OM-1505
1-10
2. Maintenance Check List : Chap.1
2. Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are
classied and described based on how frequently each item should be performed.
Use the tables below as check lists.
2.1 Daily Maintenance
Object Units
Inspection, Cleaning,
and Lubrication Spots
Work Grease Required Tools Check
3.2.2
Squeegee Head
Section
Squeegee Cleaning - Rag and Industrial Alcohol
(Solvent)
3.2.3
Stencil Holder Section
Stencil Printing Pattern Cleaning - Industrial Alcohol
(Solvent) and Ultrasonic
Cleaning
Upper Surface of Stencil
Holder
Cleaning - Rag
Lower Surface of Stencil Cleaning - Rag and Industrial Alcohol
(Solvent)
3.2.5
Conveyor Section
L conveyor Upper Surface
of PCB Transfer Belt
Cleaning - Vacuum Cleaner
R conveyor Upper Surface
of PCB Transfer Belt
Cleaning - Vacuum Cleaner
3.2.6
PCB Chuck Section
Upper Surface of PCB
Transfer Belt
Cleaning - Vacuum Cleaner
PCB Positioning Side and
Upper Surface
Cleaning - Vacuum Cleaner
3.2.8
Cleaning Section
Hose and Hose Joint Liquid
Leakage
Check,
Cleaning
- Rag
Solvent Tank, Solvent
Pan, and Hose Joint
Liquid
Leakage
Check,
Cleaning
- Rag
T4A6
1002-002
4OM-1505
1-11
2. Maintenance Check List : Chap.1
WARNING
As industrial alcohol is ammable, be sure to keep it
away from any possible sources of re as it is likely
to ignite and start a re.
•
Keep industrial alcohol away from any heat of re.
•
Avoid smoking and using re when near the device.
CAUTION
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to
wear protective equipment (gloves and apron, etc.) to
protect against spills on exposed skin.
•
Whenever solder paste has adhered to your skin,
immediately remove it with lukewarm water mixed
with a cleaning detergent.
Notice
For industrial alcohol (solvent), use T4A1 alcohol.
0906-001