4OM-1505-004_w.pdf - 第86页
4OM-1505 1-35 3. Maintenance Spots : Chap.1 Table X-Axis Linear Guide (Left Side), (Right Side) Every 5 years Lubrication Inject new grease from the grease nipple with a brush or a grease gun. Use the U- and P-type attac…
4OM-1505
1-34
3. Maintenance Spots : Chap.1
Apply grease with a brush or a
spatula.
Every 3 Months after Initial One
Lubrication (NM1)
Table Q-Axis Movable Bearing
Outer Circumference
Apply grease with a brush or a
spatula.
Every 6 Months Lubrication
Tabel Q-Axis Ball Screw
Clean the stopper with an oiled rag.
Every Month Cleaning
Tabel Q-Axis Linear Guide
Inject new grease from the
grease nipple with a grease gun
from the rear side of the machine.
Every 5 years Lubrication
Use the H-type attachment.
Tabel Q-Axis Linear Guide
Note
Note
Do not leave any waste
threads after cleaning.
F4A25
0906-001
4OM-1505
1-35
3. Maintenance Spots : Chap.1
Table X-Axis Linear Guide
(Left Side), (Right Side)
Every 5 years Lubrication
Inject new grease from the grease
nipple with a brush or a grease
gun.
Use the U- and P-type
attachments.
Front Side
Note
F4A26
Table X-Axis Linear Guide
Every 6 Months Lubrication
(Left Side)
Use SPK-3C attachment.
Inject new grease from the grease
nipple with a brush or a grease
gun.
Clean the stopper with an oiled
rag.
Every Month Cleaning
Table X-Axis Linear Guide
Do not leave any waste
threads after cleaning.
(Right Side)
Rear Left Side
Rear Right Side
Note
Note
F4A27
0906-001
4OM-1505
1-36
3. Maintenance Spots : Chap.1
3.2.8 Cleaning Section
Hose Joint
When the industrial alcohol (solvent)
is leaking, remove the bolt and wipe
off the alcohol with a rag.
If loosened, tighten it after removing
the bolt once.
Every Day Cleaning
Hose Joint
Confirm that the industrial alcohol
(solvent) is not leaking and the bolt is
not loosened with a mirror.
And also, check the joints and the
packing.
Every Day Check
Cleaning Nozzle
Every Month Cleaning
Remove solder paste and dust using
a cloth soaked in industrial alcohol.
In the case that solder paste can not
be removed, scrape it and clean it
again using a cloth soaked in industrial
alcohol.
F4A28
0906-001