PCP-Manual-REV-C.pdf - 第27页
PCP Series Manual Revision B / October 2021 Page 27 of 56 14. Apply pump conditioner to the rotor. 15. Install the stator tool onto the rot or assembly. Figure 30 : Install Stator Tool 16. Face the tabs of the stator tow…
PCP Series Manual
Revision B / October 2021
Page 26 of 56
9. Lubricate the SS5 O-ring with pump conditioner.
10. Install the SS5 O-ring onto the vent port.
Figure 27: Install O-Ring on Vent Port
11. Lubricate the SS5 O-rings with pump conditioner.
12. Install the SS5 O-rings on the bleed clip based on the picture below.
Figure 28: Install O-Rings on Bleed Clip
13. Install the bleed clip onto the vent port.
Figure 29: Install Bleed Clip
PCP Series Manual
Revision B / October 2021
Page 27 of 56
14. Apply pump conditioner to the rotor.
15. Install the stator tool onto the rotor assembly.
Figure 30: Install Stator Tool
16. Face the tabs of the stator toward the fluid block assembly. Hold the stator tool to
stabilize and twist on the stator.
Figure 31: Install Stator onto Rotor Assembly
PCP Series Manual
Revision B / October 2021
Page 28 of 56
Note: Align the tabs with the locating features.
Figure 32: Align Tabs with Locating Features
Note: The rotor should be flush with the bottom of the stator.
Figure 33: Rotor and Stator