PCP-Manual-REV-C.pdf - 第36页
PCP Series Manual Revision B / October 2021 Page 36 of 56 Manual Mode Devices 1. Select Manual from the cycle stop screen. 2. Select the Devices tab. 3. Select the valve from the Select Valve drop down men u. 4. Select P…
PCP Series Manual
Revision B / October 2021
Page 35 of 56
How to Use the PCP with Portal
If your PCP is on a workcell with PVA Portal, you will use the screens that follow to operate
it. Refer to the Portal manual for additional information on how to use the program.
NOTE: The screens may be different based on customer specific configuration.
The screens that relate to the PCP are in Manual mode under “PCP050”. When you are in
this screen, a row of tabs will be shown under the row of manual mode tabs. Use the left
and right arrows to scroll through the tabs.
Setup Mode
The settings that are used in Auto Cycle can be changed in Setup Mode as shown below.
1. Select Setup mode.
2. Select the Setup Tree tab.
3. Select the + symbol next to a Parameter to expand the setup tree as shown in the
examples below.
4. Double click on any parameter to open an edit window.
Figure 43: Setup Screen
PCP Series Manual
Revision B / October 2021
Page 36 of 56
Manual Mode
Devices
1. Select Manual from the cycle stop screen.
2. Select the Devices tab.
3. Select the valve from the Select Valve drop down menu.
4. Select Purge Valve to purge material from the selected valve.
5. Select the Z-Slide Up or Down buttons to move the Z-slide.
Figure 44: Devices Screen
PCP Series Manual
Revision B / October 2021
Page 37 of 56
Dispense
1. Select Manual from the cycle stop screen.
2. Select the PCP050 tab.
3. Select the Dispense tab.
4. Set the Dispense Rate in grams per minute. Select the value box and use the up
and down arrows or use the keyboard to type the value.
5. Select the Suckback On button to toggle it on and off.
6. Set the Suckback time in seconds. Select the value box and use the up and down
arrows or use the keyboard to type the value.
7. Select Apply to Auto to apply the set values to Auto Mode.
Figure 45: Dispense Screen