OM-1754-001w_GS-F600.pdf - 第29页
OM-1754 Cont-1 Contents Page 1303-001 Before Use ............................................................................................ 1 Installation / T ransfer and After-Sale Service ............................…
Safe-22
Safety Precautions
OM-1754
1303-001
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
Do not expose the machine to combustible or corrosive gas.
Select a place free of lamp soot and dust.
Level the machine at the correct height, using a level vial.
The machine should be free of obstacles around it for easy maintenance.
Power Supply
Conrm that the following power is supplied to the main machine (SIGMA-G5S/G5S2).
•
Voltage : 200 ± 20 V AC, 3-Phase
•
Apparent Power : Approx. 6.2 kVA
Fluctuating voltage and noise in the power line can have not only a bad inuence on the
machine but also trigger a malfunction of the machine, causing an accident.
Take necessary measures to prevent the other equipment from generating noises.
Air Supply
Supply dry and clean air (Pressure: 0.45 to 0.69 MPa (4.6 to 7 kgf/cm
2
)) that does not
contain moisture, oil, and dust to the main machine (SIGMA-G5S/G5S2).
When the supplied air contains much moisture, etc., the machine may not work normally
due to the moisture, etc., accumulated in the machine.
6. Precautionary Items for Correct Operations
OM-1754
Cont-1
Contents
Page
1303-001
Before Use ............................................................................................ 1
Installation / Transfer and After-Sale Service ................................... 3
Requirements and Orientation / Training for Operators ................... 3
About Specication Change ............................................................. 4
About Disposal of Unit...................................................................... 4
Other Precautionary Items ............................................................... 4
Safety Precautions
1. About Safety Precaution Labels .................................................... 1
2. General Safety Instructions .......................................................... 2
Basic Precautions ............................................................................ 2
3. Common Precautionary Items ...................................................... 3
Precautions before Use.................................................................... 3
Notes on Machine Operation ........................................................... 4
Notes on Installation, Transfer and Maintenance ............................. 6
4. Alert Indications in Instruction Manual .......................................... 7
5. Alert Labels ................................................................................... 10
Location of Alert Labels .................................................................... 10
Alert Labels and Description ............................................................ 14
6. Precautionary Items for Correct Operations ................................. 20
Requirements for Installation ........................................................... 20
Precautionary Measures before Installation ..................................... 21
Power Supply ................................................................................... 22
Contents ............................................................................................. Cont-1
OM-1754
Cont-2
Contents
Page
Chapter 1 Guide
1. Outline ............................................................................................ 1-1
1.1 What is Multi-Layer Tray Feeder? ........................................... 1-1
1.2 Specications .......................................................................... 1-1
1.3 Standard Accessory Parts List ................................................ 1-7
2. Various Functions and Outline of Actions ....................................... 1-8
2.1 Various Functions ................................................................... 1-8
2.2 Outline of Actions .................................................................... 1-10
3. Name of Each Section and Handling ............................................. 1-11
3.1 Elevator Unit ........................................................................... 1-13
3.2 Traverse Cart .......................................................................... 1-15
3.3 Cutter Unit ............................................................................... 1-15
3.4 Magazines .............................................................................. 1-16
3.4.1 Attachment Procedure of Pallets ................................... 1-17
3.4.2 Detachment of Pallets ................................................... 1-17
3.4.3 Replacement of Magazine ............................................. 1-18
3.5 Pallets ..................................................................................... 1-21
3.6 Tray Fixing Magnets ............................................................... 1-24
1303-001