OM-1754-001w_GS-F600.pdf - 第40页
OM-1754 1-4 n o i t p i r c s e D m e t I 6. Tray Arrangement Area where no tray should be put Pallet origin Pallet T ray Note c 7. Installable Number of Pallets Max. 15 p all ets / mag azi ne × 2 ma g azi nes Note : The…
OM-1754
1-3
noitpircseD metI
Notes : (a) "t1" or "t2" ("Note a" in the above table) is more than 8 mm and
14 mm or less in height (thickness), keep the upper pallet empty
for such components.
(b) "S (Leeway)" becomes "Max. 0.5 mm" when the outer
dimensions of the mold is "9 × 9 mm" or less.
(c) The mass of components and the tray fixing magnet is included.
(d) Some trays cannot be used due to the mechanical characteristics.
(e) When the tray where "t1" or "t2" value exceeds 14 mm, is to be
handled, the multi-functional head is required.
(f) In the case that "t2" value is less than 3 mm, the middle-size
odd-shaped nozzle (option) is required.
4. Applicable
Components
Applicable Components
• Flat Packaged ICs
• Connector
• Other similar-shaped components
t
a
d
b
c
Unit : mm
Notes : (a) In the case of connector, up to 100 × 26 mm can be handle.
(b) The irregular-shaped components can also be used when an
optional device is provided.
(c) Some components cannot be used due to the mechanical
characteristic.
(d) When the component size (a × b) exceeds "44 × 44 mm" the
multifunctional heads (option) are required.
(e) In the case that the "t" value exceeds 12.7mm, the multi-
functional head (option) is required.
5. Number of
Installable Types
of Components
Max. 9 types / pallet (used under programming)
• When the magazine (GS-MG100) is used : 270 type
a b c d t Lead End
Thickness
Mass
Min. 7 7 5 5 - 0.10 -
Max. 55
Note d
55
Note d
52 52 25.4
Note e
-
20 g
TA3
1303-001
1.2 Specications
OM-1754
1-4
noitpircseD metI
6. Tray
Arrangement
Area where no
tray should be put
Pallet origin
Pallet
Tray
Note c
7. Installable
Number
of Pallets
Max. 15 pallets / magazine × 2 magazines
Note : The number of installable pallets is limited, depending upon the tray
height.
TA4
1303-001
1.2 Specications
OM-1754
1-51303-001
noitpircseD metI
8. Total Mass of
Magazine
Max. 40 kg / magazine
Note : The total mass of installed magazines should be Max. 2 kg per pallet.
Referential Total Mass
{(Component + Tray Fixing Magnet + Magnet Attachment)
+ Pallet} × 15 Steps + Magazine
= {1.63 + 0.7} × 15 + 5
= 40 kg
9. Magazine Batch
Replacement
Magazines can be replaced in batches.
10. Magazine
Separation
Function
The section where magazines are installed can be transferred at the upper or
the lower end of the elevator, making it possible to replace magazines or trays
while the machine is running.
11. Power Supply 200 V AC (The power is supplied from the main machine of SIGMA-G5S.)
12. Apparent Power Approx. 3.0 kVA (Reference)
13. Air Pressure 0.45 MPa (4.6 kgf/cm
2
)
Note : Use the dry and clear air as follows.
Moisture
: Dew Point - 17 ºC or less (Atmospheric Pressure)
Oil
: 0.1 mg/m³ or less (ANR)
Dust
: Solid 0.01
µm or less
(The air is supplied from the main machine of SIGMA-G5S.)
14. Air Consumption Approx. 2 L/min (Normal)
15. Mass Traverse Cart : Approx. 140 kg
(The total mass of magazines is excluded.)
Elevator Unit : Approx. 180 kg
(The total mass of magazines is excluded.)
Magazine : Approx. 5 kg
(The total mass of Pallets is excluded.)
Pallet : Approx. 700 g
Tray Fixing Magnet : Approx. 25 g
Magnet Attachment : Approx. 2 g
TA5
1.2 Specications