CP6S-PAM操作手册.pdf - 第47页
This function displays the deviation average for the X, Y and Q-axes for all heads (A~T). The X, Y, and Q-axis deviation averages for all of the sequences placed with the nozzle type specified on command page 141 will di…
Second Display Area : READY
First Status Area : DEVIATION
Function Key Operation
+ PAGE: Displays the next page
- PAGE: Displays the previous page
Data Save: Prints the deviation information for the angle specified on page 141.
All the sequences placed with the selected nozzle size are sent to the
printer if [All deg.] is selected.
Selecting [0 deg], [90 deg.], [180 deg.] or [270 deg.] sends the deviation
values for the sequences placed with the selected nozzle size at the
specified angle to the printer.
The printed format is shown on the following page.
RETURN: Returns to page 141-1 To page 141-1
Print Format
The angle data displayed between "Nozzle Type" and "Data No." is what is sent to the
printer.
Deviation Nozzle type 1
All deg.
X, Y [1/1000 mm] Q [1/1000 deg]
dX, dY [1/1000 mm] dQ [1/1000 deg]
N3 X -10000 Y 10000 Q 9000 dX -10 dY -1 dQ 90
N4 X -10000 Y 10000 Q 9000 dX 18 dY 3 dQ -320
Note: "****" displays for the sequence data if a vision processing error occurs while the software
reads the placement data (dX, dY, dQ).
6. Description of Commands
Version 3.0 6-14 CP-6 Series PAM Operation
This function displays the deviation average for the X, Y and Q-axes for all heads (A~T).
The X, Y, and Q-axis deviation averages for all of the sequences placed with the nozzle
type specified on command page 141 will display after selecting "All deg.".
The X, Y and Q-axis deviation averages for all sequences placed with the selected nozzle
types and placement angles are displayed when [0 deg.], [90 deg.], [180 deg.], or [270
deg.] are selected.
If a vision processing error occurs while reading placement coordinates, that sequence
data cannot be used for the calculations.
A "0" displays for the placing positions not yet calculated.
Function Key Menu
Monitor Display
Second Display Area
: READY
First Status Area : DEV. AVG.
Page141
CP_6.PROGRAM
000000000000
000000000000
Prod 00000 Sche 00000
P1.00 off line
ST 1N
ST 2N
ST 3N
ST 6N
ST 7N
ST 8N
ST10N
ST11N
3D 5Er****
3D 5Er****
3D 5Er****
3D 5Er****
3D 5Er 0
3D 5Er 0
3D 5Er 0
3D 5Er 0
Operation : Front
RETURN
Ready
jog
XY
C
Head
STATUS
P Mode
Recovery
T Mode
PAM Mode
Product
E Pass
Joint
DEV. AVG.
Axis
C6PM6029
Axis RETURNHead
Specific Nozzle Deviation Average
Deviat'n avg.
Page
141-1-2
6. Description of Commands
Version 3.0 6-15 CP-6 Series PAM Operation
Function Key Operation
Axis: Press to display average deviation for each of the X, Y and Q-axes.
The monitor displays what is shown below.
• The data displayed is for the nozzle and angle(s) listed in the upper right region of
the 1st display area under the heading "Nozzle Type".
• The units of measurement displayed are 1/1000 mm for dX, dY, and 1/1000 deg
for dQ.
• The data used to calculate the deviation amount displays in the middle right side
of the 1st display area.
• All of the data displayed on the screen prints when [Data Save] is pressed if [All
deg.] is selected. Selecting [0 deg.], [90 deg.], [180 deg.], or [270 deg.], prints the
deviation data for all of the other angles as well.
The print format is shown on the following page.
• After selecting [RETURN], the display clears and the monitor returns to the initial
screen where either [Axis] or [Head] may be selected.
Output Format (deviation average per axis)
With [All deg.] selected:
Average Deviation Nozzle type 1
All deg.
dX, dY [1/1000 mm] dQ [1/1000 deg]
Avg. dX -13 Avg. dY -9 Avg. dQ -278
Page141
CP_6.PROGRAM
000000000000
000000000000
Prod 00000 Sche 00000
P1.00 off line
Operation : Front
Ready
RETURN
jog
XY
C
Data Save
Avg.dX
- 13
Avg.dQ
- 278- 9
Avg.dY
DEV. AVG.
Mesurement Results
Nozzle Type
All Deg
Data
5000
dXdY
[1/1000 mm]
dQ
[1/1000 deg]
C6PM6030
6. Description of Commands
Version 3.0 6-16 CP-6 Series PAM Operation