CP6S-PAM操作手册.pdf - 第53页

Output Format (deviation average per axis) With [All deg.] selected: Average Deviation Nozzle type 1 All deg. dX, dY [1/1000 mm] dQ [1/1000 deg] Max. dX 26 Avg. dY 19 Avg. dQ -476 Min. dX -13 Avg. dY -9 Avg. dQ -278 With…

100%1 / 69
Function Key Operation
Axis: This displays the X, Y and Q-axis minimum and maximum deviation values
for all of the heads (A ~T).
The monitor displays what is shown below.
• The data displayed is for the nozzle and angle(s) listed in the upper right region of
the 1st display area under the heading "Nozzle Type".
• The unit of measurement displayed is 1/1000 mm for the Min/Max dX, dY and
1/1000° for the Min/Max dQ.
• The data used to calculate Min/Max deviation amount is displayed in the middle
of the right side in the 1st display area.
• The current display is sent to the printer if [Data Save] is selected. The output is
shown below.
• When [RETURN] is pressed, the screen is cleared and the monitor will return to
the initial display where [Axis] or [Head] can be selected.
Page141
CP_6.PROGRAM
000000000000
000000000000
Prod 00000 Sche 00000
P1.00 off line
Operation : Front
Ready
RETURN
jog
XY
C
Data Save
Max.dX
26
Max.dX
- 13
Max.dQ
476
Max.dQ
- 278
19
Max.dY
- 9
Max.dY
MAX/MIN DEV.
Max/Min Deviation for Each Axis
Nozzle Type
No. 1
All Deg.
Data
5000
dXdY
[1/1000 mm]
dQ
[1/1000 deg]
C6PM6048
6. Description of Commands
Version 3.0 6-20 CP-6 Series PAM Operation
Output Format (deviation average per axis)
With [All deg.] selected:
Average Deviation Nozzle type 1
All deg.
dX, dY [1/1000 mm] dQ [1/1000 deg]
Max. dX 26 Avg. dY 19 Avg. dQ -476
Min. dX -13 Avg. dY -9 Avg. dQ -278
With [0 deg.], [90 deg.], [180 deg.], or [270 deg.] selected:
Maximum and Minimum Deviation Nozzle type 1
dX, dY [1/1000 mm] dQ [1/1000 deg]
0 deg. 90 deg. 180 deg. 270 deg.
dX dY dQ dX dY dQ dX dY dQ dX dY dQ
Max. 29 11 61 26 11 -35 27 11 73 23 11 -22
Min. 12 -9 -123 8 -8 -332 7 -10 -121 8 -4 -390
6. Description of Commands
Version 3.0 6-21 CP-6 Series PAM Operation
Head: The minimum and maximum deviations for the X, Y and Q-axes of all
sequences placed with the nozzle type selected on command page 141 are
displayed when [All deg.] is selected.
The minimum and maximum deviations for X, Y, and Q-axes for all
sequences placed with the selected nozzle types and placement angles are
displayed when [0 deg], [90 deg.], [180 deg.] or [270 deg.] are selected.
The monitor display is shown above.
• The monitor will display the maximum deviation values. Press [Min value] to
display the minimum values.
• The data displayed is for the nozzle and angle(s) listed in the upper right region of
the 1st display area under the heading "Nozzle Type".
• The unit of measurement displayed is 1/1000 mm for Max/Min dX, dY and
1/1000 deg for Max/Min dQ.
• The number of data used to calculate the deviation amount displays in the middle
on the right side of the 1st display area.
• Pressing [+PAGE] or [-PAGE] displays data for the other heads which overflow
from the monitor screen.
• Press [Max value] to display the maximum deviation for the X, Y and Q- axes.
• Press [Min value] to display the minimum deviation for the X, Y and Q- axes.
• Press [Data Save] to print out the current display. The format is shown on the
following page.
• Press [RETURN] to clear the monitor and return to the initial screen to select either
[Axis] or [Head].
RETURN: Returns to page 141 or to page 141-1. To page 141-1
Page141
CP_6.PROGRAM
000000000000
000000000000
Prod 00000 Sche 00000
P1.00 off line
Operation : Front
Ready
RETURN
jog
XY
C
-PAGE Max value Min value Data Save
Avg.dX
13
23
12
9
1
4
1
10
7
3
HEAD
HEAD A
HEAD B
HEAD C
HEAD D
HEAD E
HEAD F
HEAD G
HEAD H
HEAD I
HEAD J
Avg.dQ
278
543
324
765
89
87
65
213
68
324
9
12
9
11
3
4
10
5
3
2
Avg.dY
MAX/MIN DEV.
Average Deviation for Each Head
Nozzle Type
No. 1
All deg.
Data
5000
dXdY
[1/1000 mm]
dQ
[1/1000 deg]
+PAGE
C6PM6049
6. Description of Commands
Version 3.0 6-22 CP-6 Series PAM Operation