4OM-1050-002.pdf - 第287页
Error ID ltem Description 801001 Auto Of fset T each Information Auto offset teach mode start.(this prcs. Completed) 801002 Auto Offset T each Information Nozzle not found. 801003 Auto Of fset T each Information Nozzle D…
Error ID ltem Description
800D01 Maintenance Warning Trash box fill up warning.(notice count over)
800D02 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Weekly)
800D03 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Monthly)
800D04 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/3-Monthly)
800D05 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/6-Monthlyy)
800D06 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #1)
800D07 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #2)
800D08 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Nozzle)
800D09 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #1)
800D0A Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #2)
800D0B Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #1)
800D0C Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #2)
800D0D Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #3)
800D0E Maintenance Warning Component box fill up warning.(notice count over)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800E01 Program Change Warning Check the setup of machine.(program change completed)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0210-001 2-160-6 AFO01ETRP
Error ID ltem Description
801001 Auto Offset Teach Information Auto offset teach mode start.(this prcs. Completed)
801002 Auto Offset Teach Information Nozzle not found.
801003 Auto Offset Teach Information Nozzle Dirt Detection. If dirt has adhered, there is a possibil-
ity that it may become impossible to recognize. Please re-
move the ring lighting glass upper surface, a diffusion board,
and the dirt adhering to the nozzle.
801004 Auto Offset Teach Information Gain Level Teach Error.
801005 Auto Offset Teach Information Camera Dirt Detection. If dirt has adhered, there is a possibil-
ity that it may become impossible to recognize. Please re-
move the ring lighting glass upper surface, a diffusion board,
and the dirt adhering to the nozzle.
801006 Auto Offset Teach Information Nozzle center error.
801007 Auto Offset Teach Information Nozzle origin error.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Refer to the recognition error IDs that will appear with the error messages.
Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
801101 Feeder Carriage Priority Mode Return to order of priority carriage.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0307-002 2-160-7 AFO01ETRP
3.3 Error IDs and Remedial Procedures
0210-001 2-160-8 AFO01ETRP
Error ID ltem Description
801201 Stat Auto Head Recovery Cpu Communication error occurred.(CPU2-CPU3)
801202 Stat Auto Head Recovery Head cam origin return action not complete.
(Not CAM ORIGIN position)
801203 Stat Auto Head Recovery Head Driver communication is time out.(from CPU3 job)
801204 Stat Auto Head Recovery Nozzle change action not complete.(cam lock action NG)
801205 Stat Auto Head Recovery Head cam position return action not complete.
801206 Stat Auto Head Recovery Nozzle change action not complete.(cam free action NG)
801207 Stat Auto Head Recovery Nozzle change action not complete.
(Not CAM ORIGIN position)
801208 Stat Auto Head Recovery Unselected Nozzle Drop.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
801301 Pickup Position Feedback Feedback value out of range. Please check feeder.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
801401 Pickup Level Data Calculated data out of range. Please check library data and
offset data.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
801402 Placement Level Data Calculated data out of range. Please check library data and
offset data.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.