4OM-1050-002.pdf - 第61页

1.4 Maintenance Method 1.4.1 Air Source (1) Purging Place a container , etc., under a filter case and press the button lo- cated at the lower section of the filter case to drain the wastewater (dirty water , sometimes mi…

(27) L/R Conveyor Sections

1.3 Maintenance Spots

0207-004 1-46 AFO01ETRP

Fig. 4A58

1.4 Maintenance Method

1.4.1 Air Source

(1) Purging

Place a container, etc., under a filter case and press the button lo-

cated at the lower section of the filter case to drain the wastewater

(dirty water, sometimes mixed with oil) from the case.

Fig. 4A60

(2) Filter Detachment and Attachment

Turn the knob until the upturned equilateral triangles match each

other as shown in the figure above and pull down the case. The

case can easily be detached. The case can also be locked by match-

ing the upturned and downturned equilateral triangles.

To detach the filter, remove the outer case and turn the inner filter

counterclockwise.

Follow the reverse procedure to attach the filter.

(3) Filter Cleaning

Use an air gun to clean the filters once in three months or whenever

they get dirty.

0207-004 1-47

AFO01ETRP

1.4 Maintenance Method

1.4.2 Filter Replacement of Head Section

(1) Detachment of Filter Holder

Pull out the filter holder forward.

Fig. 4A61

(2) Replacement of Filters

Detach two filters sideways and replace them with new ones.

Fig. 4A62

(3) Attachment of Filter Holder

Direct Cut-Off Side D upward and insert the filter holder fully until it

stops.

Cut-Off Side D

Filter Holder

Filters

0307-005 1-48 AFO01ETRP

1.4 Maintenance Method