4OM-1050-002.pdf - 第299页

Recognition Error ID Item Description 013921301 1 “Lead T ype No.” in “Lead Group 7” is improper . ---- 0139213012 “Lead T ype No.” in “Lead Group 8” is improper . ---- 0139213013 “Lead Pitch” in “Lead Group 1” is smalle…

100%1 / 345
Recognition Error ID Item Description
0139211001 An improper parameter is specified as ----
“Component shape”.
0139211002 “Mold Size Tolerance X” is larger than “Mold ----
Size X”.
0139211003 “Mold Size Tolerance Y” is larger than “Mold ----
Size Y”.
0139211004 “Outward Length Tolerances” are larger than ----
“Outward Length”.
0139211005 A front reverse side judging cannot be carried out ----
by this component size or the lighting pattern.
0139212001 The total of “Corner 1 Dim X” and “Corner 4 Dim ----
X” is larger than “Mold Size X”.
0139212002 The total of “Corner 1 Dim Y” and “Corner 2 Dim ----
Y” is larger than “Mold Size Y”.
0139212003 The total of “Corner 2 Dim X” and “Corner 3 Dim ----
X” is larger than “Mold Size X”.
0139212004 The total of “Corner 3 Dim Y” and “Corner 4 Dim ----
Y” is larger than “Mold Size Y”.
0139212005 “Electrode Size” is larger than half of “Mold ----
Size X”.
0139213001 “# of Types” (lead data) is improper. ----
0139213002 “# of Groups” (lead data) is improper. ----
0139213003 The total of “# of Leads” (lead data) is too small. ----
0139213004 “No Detection” is set in all “Insp Condtn” text ----
boxes.
0139213005 “Lead Type No.” in “Lead Group 1” is improper. ----
0139213006 “Lead Type No.” in “Lead Group 2” is improper. ----
0139213007 “Lead Type No.” in “Lead Group 3” is improper. ----
0139213008 “Lead Type No.” in “Lead Group 4” is improper ----
0139213009 “Lead Type No.” in “Lead Group 5” is improper. ----
0139213010 “Lead Type No.” in “Lead Group 6” is improper. ----
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
4.3 Recognition Error IDs and Remedial Procedures
0210-004 2-166 AFO01ETRP
Recognition Error ID Item Description
0139213011 “Lead Type No.” in “Lead Group 7” is improper. ----
0139213012 “Lead Type No.” in “Lead Group 8” is improper. ----
0139213013 “Lead Pitch” in “Lead Group 1” is smaller than ----
“Lead Width”.
0139213014 “Lead Pitch” in “Lead Group 2” is smaller than ----
“Lead Width”.
0139213015 “Lead Pitch” in “Lead Group 3” is smaller than ----
“Lead Width”.
0139213016 “Lead Pitch” in “Lead Group 4” is smaller than ----
“Lead Width”.
0139213017 “Lead Pitch” in “Lead Group 5” is smaller than ----
“Lead Width”.
0139213018 “Lead Pitch” in “Lead Group 6” is smaller than ----
“Lead Width”.
0139213019 “Lead Pitch” in “Lead Group 7” is smaller than ----
“Lead Width”.
0139213020 “Lead Pitch” in “Lead Group 8” is smaller than ----
“Lead Width”.
0139213021 “Missing Lead Start” in “Lead Group 1” is too ----
large.
0139213022 “Missing Lead Start” in “Lead Group 2” is too ----
large.
0139213023 “Missing Lead Start” in “Lead Group 3” is too ----
large.
0139213024 “Missing Lead Start” in “Lead Group 4” is too ----
large.
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
0210-004 2-167 AFO01ETRP
4.3 Recognition Error IDs and Remedial Procedures
Recognition Error ID Item Description
0139213025 “Missing Lead Start” in “Lead Group 5” is too ----
large.
. 0139213026 “Missing Lead Start” in “Lead Group 6” is too ----
large.
0139213027 “Missing Lead Start” in “Lead Group 7” is too ----
large.
. 0139213028 “Missing Lead Start” in “Lead Group 8” is too ----
large.
0139213029 “Full Length” in “Lead Type 1” is smaller than ----
“Lead Length”.
0139213030 “Full Length” in “Lead Type 2” is smaller than ----
“Lead Length”.
0139213031 “Full Length” in “Lead Type 3” is smaller than ----
“Lead Length”.
0139213032 “Full Length” in “Lead Type 4” is smaller than ----
“Lead Length”.
0139213033 “Lead Width” and “Full Length” in “Lead Type 1” ----
are not equal.
0139213034 “Lead Width” and “Full Length” in “Lead Type 2” ----
are not equal.
0139213035 “Lead Width” and “Full Length” in “Lead Type 3” ----
are not equal.
0139213036 “Lead Width” and “Full Length” in “Lead Type 4” ----
are not equal
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
0210-004 2-168 AFO01ETRP
4.3 Recognition Error IDs and Remedial Procedures