4OM-1050-002.pdf - 第83页

1.4 Maintenance Method 0307-005 1-67 AFO01ETRP 1.4.8 Lubrication of Linear Guide in Feeder Carriage Section Grease should be applied every 6 months after the initial month. • • • • • Preparation for Lubrication (1) T urn…

Fig. 4A84-1-1

(5) Detach the lower blade by removing Bolts C (M5 × 12).

When the lower blade cannot be detached easily, try to pull it

right and left alternately.

(6) Attach a new lower blade and secure it with Bolts C (M5 × 12).

(7) Attach the new lower blade holding plate and secure it with SEMS-

BOLT B (M5 × 12).

(8) Attach a new upper blade and secure it with Bolts A (M5 × 16).

(9) Turn on the power supply of machine and confirm that the rotary

turret works normally, using "Smooth Manual Axis Operation (Low

Speed)" for the rotary turret.

Refer to "2.2.1 "Rotary Turret" Tab" in "Section 6 (Vol. 2)" for details.

1.4 Maintenance Method

Lower Blade Bolts C

0301-001 1-66-1 AFO01ETRP

1.4 Maintenance Method

0307-005 1-67 AFO01ETRP

1.4.8 Lubrication of Linear Guide in Feeder Carriage Section

Grease should be applied every 6 months after the initial month.

••

• Preparation for Lubrication

(1) Turn off the power supply to the machine and wipe off old grease

on the rail of the linear guide with a rag.

(2) Prepare the FL- and P-type or the U- and P-type attachments.

Fig. 4A84-2

(3) Detach the lubrication covers from the front and rear sides of

the machine.

Fig. 4A84-3 Front Side of Machine

Fig. 4A84-4 Rear Side of Machine

FL Type

P Type

U Type

1.4 Maintenance Method

0307-007 1-68 AFO01ETRP

••

• Lubrication Procedure

The linear guide in the feeder carriage section must

be lubricated with the [POWER ON] button on the

operation panel being pressed ("ON" condition).

It is dangerous. Be sure to lubricate alone (without

any other attended personnel).

(1) Press the [UNIT ADJ.] button on the submenu bar that appears after

the [MAINT.] button is selected.

When the [Oil Supply] tab is pressed in the "Fdr Crg." tab sheet, the

following tab sheet appears.

Fig. 4A84-5 "Oil Supply" Tab Sheet

CAUTION