4OM-1050-002.pdf - 第41页

Fig. 4A28-1 Front View of Machine 1.3 Maintenance Spots 0307-001 1-27-1 AFO01ETRP

(13) Feeder Carriage Section

1.3 Maintenance Spots

0307-005 1-27 AFO01ETRP

Fig. 4A28 Top View of Machine

Linear Guide Rails 1M13

Every Month Cleaning

Clean the carriage with an oiled rag.

Yoke Sides of Linear Motors 1M13-1

Every Month Checking/Cleaning

Check for components and/or foreign substances

adhered to the yoke sides of the linear motors. If neces-

sary, clean the yoke sides with a rag.

Refer to "1.4.10 Cleaning of Linear Motor's Yoke Sides"

for details.

• Do not bring any metal of high magnetizability close

to this. Otherwise, such metal will easily be magne-

tized and attracted, causing an injury to the operator

and/or a mechanical breakdown.

• Do not bring any magnetizable material close to this.

Those who wear implanted pacemakers should not

work inside the machine. Otherwise, the pacemaker

may be affected by magnetism, leading to a serious

accident.

CAUTION

WARNING

Fig. 4A28-1 Front View of Machine

1.3 Maintenance Spots

0307-001 1-27-1 AFO01ETRP

Grease Nipples

Magnified View of Feeder Carriage

Slide Block of Linear Guide

Linear Scale in Feeder Carriage Section

(Located in the areas of F1 through F4)

Encoder Head

Slide Block of Linear Guide (Front Side) 6M4

Every 6 Months Lubrication (DAPHNE EPONEX GREASE No. 1)

Grease should be applied every 6 months after the initial month.

* Use the FL- and P-type or the U- and P-type attachments.

Refer to "1.4.8 Lubrication of Linear Guide in Feeder Carriage Section" for details.

P Type

FL Type U Type

Fig. 4A29 Front View of Machine

0307-005 1-28

AFO01ETRP

1.3 Maintenance Spots