4OM-1050-002.pdf - 第51页
1.3 Maintenance Spots 0207-004 1-37 AFO01ETRP Fig. 4A43 Placement Height Correction Section
(20) Placement Height Correction Section
1.3 Maintenance Spots
0207-004 1-36 AFO01ETRP
Fig. 4A42 Front View of Machine
1.3 Maintenance Spots
0207-004 1-37 AFO01ETRP
Fig. 4A43 Placement Height Correction Section
1.3 Maintenance Spots
0207-004 1-38 AFO01ETRP
Cylinder Fulcrum 1M34
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Inject grease from the grease nipple with a
grease gun.
* Use the U- and N-type attachments.
U-Type N-Type
Lever Surface 1M36
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply the grease by hand or using a brush.
Outer Circumference of Bearing 1M37
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
No.19
Outer Circumference of Cam Follower 1M35
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply the grease by hand or using a brush.
Roller Rests 3M23
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 3)
Apply grease with a dispense gun.
* Use the PR-type nozzle.
Cylinder Fulcrum 3M23-1
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a grease gun.
* Use the SPK-3C attachment.
Grease should be applied every 3 months
after the initial month.
Fig. 4A44 Front View of Machine
(21) Placement Up/Down Section