Manual_BSA_II_英文操作说明书.pdf - 第14页

14 BSA II Operating Instructions Operating Design 4.2.1 Buttons Symbol Designation Description [On/Off] button − When the butt on is pressed: Switches the opera ting display on. − If the button is held down: Switches the…

BSA II Operating Instructions 13

Operating Design

4 Operating Design

4.1 Operating Display in Weighing

Mode

Fig. 7: Operating display in weighing mode (example)

Pos. Designation Description

1 Metrological

Data

2 Menu

3 Application

overview

Displays the selected ap-

plication program during

operation

4 Toolbar

5 Weighing unit Displays the selected unit,

e.g., grams, [g]

6 Navigation bar For navigation in the

menu and system settings

7 Measurement

display

8 Visual touch

feedback

9 Toolbar

4.2 Menu and System Settings

Display

Fig. 8: Menu and system settings display (example)

Pos. Designation Description

1 Menu level Shows the position of the

displayed menu or param-

eter in up to 4 levels

2 Menu or param-

eter entry

3 [Selection] dis-

play

14 BSA II Operating Instructions

Operating Design

4.2.1 Buttons

Symbol Designation Description

[On/Off] button − When the button is pressed: Switches the operating display on.

− If the button is held down: Switches the operating display off.

[Menu] button − When the button is pressed: The settings menu opens.

− If the button is held down: It switches to version display.

[Zero] button Zeroes the device.

[Tare] button Starts taring.

[Print] button Exports the readouts to the integrated data interfaces.

[Adjust] button Starts the set calibration and adjustment function.

[GLP] button − Exits the GLP printout and starts printing the GLP footer.

− If the “Net total”, “Totalizing”, or “Statistics” application is active: Prints

and deletes the saved values and exits the application.

[Unit change] button If the “Unit change” function is active:

− If the button is held down: Accesses the “Unit change” function menu.

− When the button is pressed: Switches between the basic unit display

and up to 4 other units.

[Back] button − In the menu:

− When the button is pressed: Returns to the previous display.

− If the button is held down: Saves the menu settings.

− When entering digits: Selects the previous digit position.

− For an active application: Exits the application and deletes the set ref-

erence value.

[Up] button − In the menu: Scrolls through the menu levels or the available parame-

ters.

− When entering digits: Increases the displayed value.

− In the main display of an active application: Switches to the display of

the current weight value/parameter.

[Down] button − In the menu: Scrolls through the menu levels or the available parame-

ters.

− When entering digits: Decreases the displayed value.

− In the main display of an application that is not active: Opens the dis-

play to set the reference values.

− In the main display of an active application: Switches to the display of

the current weight value/parameter.

[Confirm] button − In the menu: Opens the displayed menu level or confirms the dis-

played parameter.

− When entering digits: Selects the next digit position.

− In the main display of an application that is not active: Starts the appli-

cation process and saves the set reference value.

− In the main display of an active application: Adopts the next compo-

nent or the next parameter.

BSA II Operating Instructions 15

Operating Design

4.3 Displays in the Operating Display

Symbol Designation Description

[Counting] display Indicates that the “Counting” application is selected.

[Percent weighing] dis-

play

Indicates that the “Percent weighing” application is selected.

[Calculation] display Indicates that the “Calculation” application is selected.

[Animal weighing] display Indicates that the “Animal weighing” application is selected.

[Net total] display Indicates that the “Net total” application is selected.

[Totalizing] display Indicates that the “Totalizing” application is selected.

[Density determination]

display

Indicates that the “Density determination” application is selected.

[Statistics] display Indicates that the “Statistics“ application is selected.

[Busy] display Indicates that the device is processing a command.

[Sign] display Indicates whether the value being displayed is positive or negative.

[Zero] display For some conformity-assessed devices: Indicates that the device has

been zeroed.

[AUTO] display Indicates that the “Animal weighing” application starts automatically.

[Application help] display Indicates the number of components for “Totalizing“, “Net total“, and

“Statistics“.

[R12] display Indicates the active range for multi-range balances.

[Printer] display − Indicates that a printer has been detected at the USB port.

− Flashes if the data output is active.

[PC-Connect] display − Indicates that a PC or a second display has been detected at the USB

port.

− Flashes if the data connection is active.

[Percent] display Indicates that a percentage value is being displayed.

[Net] display Indicates that a net value is being displayed.

[Gross] display Indicates that a gross value is being displayed.