Manual_BSA_II_英文操作说明书.pdf - 第50页
50 BSA II Operating Instructions T echnical Data 15.11 Mat erials Housing Plastic (ABS) Contr ol unit and operating display Glass Devices with analytical draft shield Draft shield: Glass, plastic (ABS) W eighing pan: Sta…
BSA II Operating Instructions 49
Technical Data
15.9 Backup Battery
Unit Value
Lithium battery, type CR2032
Service life at room temperature, minimum Years 10
15.10 Interfaces
15.10.1 RS232 Interface
Unit Value
Type of interface: Serial interface
Interface operation: Full duplex
Level: RS232
Connection type: D-sub connector, 9-pin
Maximum cable length: m 10
Pin Assignment
Fig. 11: Pin 1 – 9
Pin Description
1, 4, 6 Not assigned
2 Data output (T x D)
3 Data input (R x D)
5 Internal ground
7 Clear to Send (CTS)
8 Request to Send (RTS)
9 Universal remote switch
15.10.2 USB-C Interface
Communication: USB OTG
Connectable devices: Sartorius printers, Sartorius second display or PC
50 BSA II Operating Instructions
Technical Data
15.11 Materials
Housing
Plastic (ABS)
Control unit and operating display
Glass
Devices with analytical draft shield
Draft shield: Glass, plastic (ABS)
Weighing pan: Stainless steel
Pan support: Plastic (LPC)
Base plate: Stainless steel
Device with frame draft shield
Frame draft shield: Stainless steel
Weighing pan: Stainless steel
15.12 Cleaning Agents and Cleaning Procedures
Approved cleaning agents
Water or a mild soap solution
Cleaning agents suitable for the device materials (see Chapter “15.11 Materials”, page 50)
No corrosive, chloride-containing, or aggressive cleaning agents
No cleaning agents that contain abrasive ingredients, e.g. scouring agents, steel wool
No solvent-based cleaning agents
Approved cleaning procedures
Wiping the device surfaces with a lightly moistened cloth
BSA II Operating Instructions 51
Accessories
16 Accessories
This table contains a selection of the accessories that can be ordered. For information on other products, contact
Sartorius.
Item Quantity Order number
General device accessories
Display protection film (set of 5) 1 YDC10
“Kensington Lock” anti-theft device 1 YKL01
Pedal button | foot switch 1 YFS03
Second display | remote display 1 YSD01
Weighing table
made from wood with natural stone 1 YWT09
made from natural stone, with vibration dampening 1 YWT03
Wall console made from natural stone 1 YWT04
Weighing Accessories
Dust cover for balances with an analytical draft shield 1 6960BC01
Density determination set for solids and liquids for balances with a read-
ability of 0.1mg | 1mg
1 YDK03
Printer and Accessories for Data Communication
Dot matrix printer (USB-B, RS232) 1 YDP50
Thermal transfer printer (USB-B, RS232) 1 YDP30
Data cable USB-C > USB-B, 1.5 m 1 YCC-USB-C-B
Data cable USB-C > USB-A, 1.5 m 1 YCC-USB-C-A
Data cable RS232 (9-pin) > USB-A, 1.5 m 1 YCC-D09M-USB-A
Data cable RS232 (9-pin) male > RS232 (9-pin) male, 1.5 m 1 YCC-D09MM
Data cable RS232 (9-pin) male > RS232 (9-pin) female, 1.5 m 1 YCC-D09MF
Y-adapter RS232 (9-pin) male > 2x RS232 (9-pin) female, 1.5 m 1 YCC-D09M-2D09F
External Calibration and Adjustment Weights
For models BSA224-1x | BSA224I-1x; 200 g, accuracy class E2 1 YCW522-AC-02
For models BSA124-1x | BSA124I-1x; 100 g, accuracy class E2 1 YCW512-AC-02
For models BSA623-1x | BSA623I-1x; 500 g, accuracy class F1 1 YCW553-AC-02
For models BSA423-1x | BSA423I-1x | BSA323-1x | BSA323I-1x |
BSA223-1x| BSA223I-1x; 200 g, accuracy class F1
1 YCW523-AC-02
For models BSA6202-1x | BSA6202I-1x; 5000 g, accuracy class F1 1 YCW653-AC-02
For models BSA4202-1x | BSA4202I-1x | BSA32023-1x | BSA3202I-1x |
BSA2202-1x | BSA2202I-1x; 2000 g, accuracy class F1
1 YCW623-AC-02
For models BSA822-1x | BSA822I-1x; 500 g, accuracy class F2 1 YCW554-AC-02