Manual_BSA_II_英文操作说明书.pdf - 第26页

26 BSA II Operating Instructions Operating Design 4.6.10 “ APPLIC.“/“PERCENT“ Menu P arameters Settings Explanation DEC.PL CS NONE The r esult of the “W eighing in P ercent” application is displayed without deci- mal pla…

100%1 / 53
BSA II Operating Instructions 25
Operating Design
Parameters Settings Explanation
PRT.INIT. OFF Deactivates the output of the application parameters.
ALL* The print command prints all parameters.
MAIN.PAR. The print command only prints the main parameters.
GLP OFF* Deactivates the GLP printout.
CAL./ADJ. Activates the GLP printout for all calibration and adjustment processes.
ALWAYS The GLP printout is always switched on. All printouts contain a GLP header
and a GLP footer.
TAR./PRT. OFF* Deactivates automatic taring after printer output.
ON Automatically tares the device after every printout.
TIME 24H* Sets the time to 24-hour mode.
12H − Sets the time to 12-hour mode (AM/PM).
− Is blocked for ISO format.
DATE DD.MMM.YY* Sets the date display format to DD.MMM.YY
MMM.DD.YY Sets the date display format to MMM.DD.YY
YY.MM.DD − Sets the date display format to ISO FORMAT YYYY-MM-DD.
− Sets the time to 24-hour mode.
* Factory setting
4.6.8 “APPLIC.“/“WEIGH“ Menu
Parameters Settings Explanation
UNIT ON* Activates the “Toggle between weight units” touch function.
OFF Deactivates the “Toggle between weight units” touch function.
RECALL ON Activates the saving of the last stable weight value not equal to 0.
OFF* Deactivates saving.
* Factory setting
4.6.9 “APPLIC.“/“COUNT“ Menu
Parameters Settings Explanation
RESOLUT. DISP.ACC.* Sets the resolution to “display resolution“. The “Counting” application is
started with the displayed value.
10FACH Sets the resolution to 10-times more accurate than “display resolution“.
100FACH Sets the resolution to 100-times more accurate than “display resolution“.
REF.UPDT. OFF* Deactivates automatic reference sample updating.
AUTO Activates the automatic reference sample updating.
* Factory setting
26 BSA II Operating Instructions
Operating Design
4.6.10 “APPLIC.“/“PERCENT“ Menu
Parameters Settings Explanation
DEC.PLCS NONE The result of the “Weighing in Percent” application is displayed without deci-
mal places.
1 DEC.PL.* The result of the “Weighing in Percent” application is displayed to 1 decimal
place.
2 DEC.PL. The result of the “Weighing in Percent” application is displayed to 2 decimal
places.
3 DEC.PL. The result of the “Weighing in Percent” application is displayed to 3 decimal
places.
* Factory setting
4.6.11 “APPLIC.“/“NET.TOT.“ Menu
Parameters Settings Explanation
PRT.COMP. OFF Deactivates the component printout.
ON* Activates the component printout.
* Factory setting
4.6.12 “APPLIC.“/“TOTAL“ Menu
Parameters Settings Explanation
PRT.COMP. OFF Deactivates the component printout.
ON* Activates the component printout.
* Factory setting
4.6.13 “APPLIC” / “ANIMALW” Menu
Parameters Settings Explanation
ACTIVIT. CALM Sets the intensity of the “Animal activity“ to “calm“. Recommended for minor
movements of the sample, e.g. caused by placement on the weighing pan.
ACTIVE* Sets the intensity of the “Animal activity“ to “active“. Recommended for me-
dium movements of the sample, e.g. caused by placement on the weighing
pan.
V.ACTIVE Sets the intensity of the “Animal activity“ to “very active“. Recommended for
very active movements of the sample, e.g. caused by placement on the
weighing pan.
* Factory setting
BSA II Operating Instructions 27
Operating Design
Parameters Settings Explanation
START MANUAL The “Animal weighing” application must be manually selected in the start
screen.
AUTO* Sets the trigger to start the “Animal weighing“ application to “automatic“.
* Factory setting
4.6.14 “APPLIC.“/“CALC.“ Menu
Parameters Settings Explanation
METHOD MUL.* Specifies multiplication as the method of calculation for the “Calculation“
application.
DIV. Specifies division as the method of calculation for the “Calculation“ applica-
tion.
DEC.PLCS NONE The result of the “Calculation” application is displayed without decimal plac-
es.
1 DEC.PL.* The result of the “Calculation” application is displayed to 1 decimal place.
2 DEC.PL. The result of the “Calculation” application is displayed to 2 decimal places.
3 DEC.PL. The result of the “Calculation” application is displayed to 3 decimal places.
* Factory setting
4.6.15 “APPLIC.“/“DENSITY“ Menu
Parameters Settings Explanation
DEC.PLCS NONE The result of the “Density determination” application is displayed without
decimal places.
1 DEC.PL.* The result of the “Density determination” application is displayed to 1 deci-
mal place.
2 DEC.PL. The result of the “Density determination” application is displayed to 2 deci-
mal places.
3 DEC.PL. The result of the “Density determination” application is displayed to 3 deci-
mal places.
* Factory setting