Manual_BSA_II_英文操作说明书.pdf - 第22页
22 BSA II Operating Instructions Operating Design 4.6.4 “DEVICE“/“USB“ Menu P arameters Settings Explanations DA T .R EC .** XBPI Extended range of commands to c ontrol numerous balanc e functions with binary protocol fo…
BSA II Operating Instructions 21
Operating Design
4.6.3 “DEVICE“/“RS232“ Menu
Parameters Settings Explanations
DAT.REC. XBPI Extended range of commands to control numerous balance functions with
binary protocol for direct communication with the device.
SBI* Enables SBI communication. The data is output to a PC or control unit. En-
ables the use of ESC commands from a PC to control the basic balance
functions with ASCII protocol.
REM.DISP. Enables data output on another display.
YDP20 Sets the standard settings of YDP20 printers.
YDP30 Sets the standard settings of YDP30 printers.
OFF Deactivates the automatic data output.
BAUD 600, 1200, 2400,
4800, 9600*,
19200, 38400,
57600, 115200
Sets the baud rate to the selected value.
PARITY ODD* Applies an odd parity.
EVEN Applies an even parity.
NONE Does not apply a parity.
STOPBIT 1 BIT*
2 BITS
HANDSHK. SFTWARE Sets the handshake protocol to software handshake.
HRDWARE* Sets the handshake protocol to hardware handshake.
NONE Does not set a handshake protocol.
DATABIT 7 BITS Sets the number of data bits to 7.
8 BITS* Sets the number of data bits to 8.
* Factory setting
22 BSA II Operating Instructions
Operating Design
4.6.4 “DEVICE“/“USB“ Menu
Parameters Settings Explanations
DAT.REC.** XBPI Extended range of commands to control numerous balance functions with
binary protocol for direct communication with the device.
SBI* Enables SBI communication. The data is output to a PC or control unit. En-
ables the use of ESC commands from a PC to control the basic balance
functions with ASCII protocol.
REM.DISP. Enables data output on another display.
YDP20 Sets the standard settings of YDP20 printers.
YDP30 Sets the standard settings of YDP30 printers.
OFF Deactivates the data output.
BAUD** 600, 1200, 2400,
4800, 9600*,
19200, 38400,
57600, 115200
Sets the baud rate to the selected value.
PARITY** ODD* Applies an odd parity.
EVEN Applies an even parity.
NONE Does not apply a parity.
STOPBIT ** 1 BIT*
2 BITS
HANDSHK.** SFTWARE Sets the handshake protocol to software handshake.
HRDWARE Sets the handshake protocol to hardware handshake.
NONE* Does not set a handshake protocol.
DATABIT** 7 BITS Sets the number of data bits to 7.
8 BITS* Sets the number of data bits to 8.
DEV.USED NONE*, PRINT-
ER, VIRT.COM,
PC HOST, REM.
DISP.
Indicates which connection is detected at the USB port.
* Factory setting
** Are blocked if “PRINTER“ or “REM.DISP.“ are displayed under “DEV.USED“
BSA II Operating Instructions 23
Operating Design
4.6.5 “DEVICE“/“EXTRAS“ Menu
Parameters Settings Explanation
MENU EDITABL.* Activates write access. The menu parameters can be changed.
RD.ONLY Activates read access. The menu parameters cannot be changed.
SIGNAL OFF Switches the acoustic signal off.
ON* Switches the acoustic signal on.
KEYS UNLOCK.* Deactivates the button lock.
LOCKED Activates the button lock.
EXT.KEY PRINT Assigns the print function to the external key.
CAL. Assigns the calibration and adjustment function selected under [CAL.-ADJ.]
to the external key.
CF Assigns the [Back] function to the external key.
ENTER Assigns the [Confirm] function to the external key.
ZERO Assigns the [Zero] function to the external key.
TARE Assigns the [Tare] function to the external key.
GLP END Assigns the [GLP] function to the external key.
NO* No function is assigned to the external key.
ON MODE ON/STDB.* The [On/Off] button switches between on/standby with clock display.
ON/OFF The [On/Off] button switches between on/standby without clock display.
AUTO ON Changes the function of the [On/Off] button: The device no longer switches
off or to standby mode, instead it starts a boot process.
LIGHT OFF Deactivates the lighting on the operating display.
ON* Activates the lighting on the operating display.
* Factory setting