Manual_BSA_II_英文操作说明书.pdf - 第27页
BSA II Operating Instructions 27 Operating Design P arameters Settings Explanation ST ART MANUAL The “ Animal weighing” application must be manually selected in the st art screen. AUTO * Sets the trigger t o start the “ …
26 BSA II Operating Instructions
Operating Design
4.6.10 “APPLIC.“/“PERCENT“ Menu
Parameters Settings Explanation
DEC.PLCS NONE The result of the “Weighing in Percent” application is displayed without deci-
mal places.
1 DEC.PL.* The result of the “Weighing in Percent” application is displayed to 1 decimal
place.
2 DEC.PL. The result of the “Weighing in Percent” application is displayed to 2 decimal
places.
3 DEC.PL. The result of the “Weighing in Percent” application is displayed to 3 decimal
places.
* Factory setting
4.6.11 “APPLIC.“/“NET.TOT.“ Menu
Parameters Settings Explanation
PRT.COMP. OFF Deactivates the component printout.
ON* Activates the component printout.
* Factory setting
4.6.12 “APPLIC.“/“TOTAL“ Menu
Parameters Settings Explanation
PRT.COMP. OFF Deactivates the component printout.
ON* Activates the component printout.
* Factory setting
4.6.13 “APPLIC” / “ANIMALW” Menu
Parameters Settings Explanation
ACTIVIT. CALM Sets the intensity of the “Animal activity“ to “calm“. Recommended for minor
movements of the sample, e.g. caused by placement on the weighing pan.
ACTIVE* Sets the intensity of the “Animal activity“ to “active“. Recommended for me-
dium movements of the sample, e.g. caused by placement on the weighing
pan.
V.ACTIVE Sets the intensity of the “Animal activity“ to “very active“. Recommended for
very active movements of the sample, e.g. caused by placement on the
weighing pan.
* Factory setting
BSA II Operating Instructions 27
Operating Design
Parameters Settings Explanation
START MANUAL The “Animal weighing” application must be manually selected in the start
screen.
AUTO* Sets the trigger to start the “Animal weighing“ application to “automatic“.
* Factory setting
4.6.14 “APPLIC.“/“CALC.“ Menu
Parameters Settings Explanation
METHOD MUL.* Specifies multiplication as the method of calculation for the “Calculation“
application.
DIV. Specifies division as the method of calculation for the “Calculation“ applica-
tion.
DEC.PLCS NONE The result of the “Calculation” application is displayed without decimal plac-
es.
1 DEC.PL.* The result of the “Calculation” application is displayed to 1 decimal place.
2 DEC.PL. The result of the “Calculation” application is displayed to 2 decimal places.
3 DEC.PL. The result of the “Calculation” application is displayed to 3 decimal places.
* Factory setting
4.6.15 “APPLIC.“/“DENSITY“ Menu
Parameters Settings Explanation
DEC.PLCS NONE The result of the “Density determination” application is displayed without
decimal places.
1 DEC.PL.* The result of the “Density determination” application is displayed to 1 deci-
mal place.
2 DEC.PL. The result of the “Density determination” application is displayed to 2 deci-
mal places.
3 DEC.PL. The result of the “Density determination” application is displayed to 3 deci-
mal places.
* Factory setting
28 BSA II Operating Instructions
Operating Design
4.6.16 “APPLIC.“/“STATIST.“ Menu
Parameters Settings Explanation
PRT.COMP. OFF Deactivates the component printout.
ON* Activates the component printout.
TAR.STAT. OFF* Deactivates automatic taring after the components are saved.
ON Activates automatic taring after the components are saved.
* Factory setting
4.6.17 “INPUT“ Menu
Parameters Settings Settings Explanation
DEV. ID Max 14 charac-
ters 09-0, A-Z, - ,
empty
Saves the entered ID number for the device.
DATE Saves the entered date.
TIME Saves the entered time.
SERV. PW. Max 7 charac-
ters 09–0, A–Z,
- , empty
Activates service mode.
INTERV. The SBI output rate can be set from 0 - 9999 seconds.
4.6.18 “LANGUAG.“ Menu
Parameters Settings Explanation
LANGUAG. ENGLISH*,
DEUTSCH,
FRANC.
ITAL.,
ESPANOL,
PORTUG.,
РYССKИИ,
POLSKI
Defines the menu language.
* Factory setting