Manual_BSA_II_英文操作说明书.pdf - 第31页
BSA II Operating Instructions 31 Commissioning 6.1.2 Dismounting the P ower P lug Adapter Pr ocedure t Pr ess the grooved but- ton from above and pull back on the power plug adapter . t Push the power plug adapter ou…
30 BSA II Operating Instructions
Commissioning
5.5 Installing a Device with a
Frame Draft Shield
5.5.1 Removing the Transport Lock
Procedure
1
t Remove the transport
locks (1) and retain
them for later use.
5.5.2 Mounting the Device
Procedure
t Insert the latch in the
recess.
t Rest the frame draft
shield completely on
top.
2
1
t Fit all shock absorb-
ers(2).
t Place the weighing pan
(1) on top.
5.6 Acclimatizing
When a cold device is brought into a warm environment:
The temperature difference can lead to condensation
from humidity in the device (moisture formation). Mois-
ture in the device can lead to malfunctions.
Procedure
t Allow the device to acclimatize to the installation
site. The device must be disconnected from the pow-
er supply during that time.
6 Commissioning
6.1 Mounting the Power Supply
Unit
6.1.1 Inserting the Power Plug Adapter
Item number
on packaging
Power supply unit YEPS01-
15VOW with connection cable
and country-specific power plug
adapters (packed in PE bag with
printed country identification, e.g.
EU)
YEPS01-PS8 USA and Japan (US+JP), Europe
and Russia (EU+RU), Great Britain
(UK), India (IN), South Africa (ZA),
Australia (AU), China (CN)
YEPS01-PS9 Argentina (AR), Brazil (BR), Korea
(KR)
YEPS01-PS10 China (CN)
Procedure
t Select the country-spe-
cific power plug adapter.
The power plug adapter
must be suitable for use
with the wall outlet at
the installation site.
t Insert the power plug adapter into the power supply
unit. The grooved button must be facing upwards.
t Push the power plug adapter as far as you can until it
audibly clicks into place.
t Check whether the power plug adapter is securely
locked in place by pulling it gently.
y If the power plug adapter does not move: The power
plug adapter is locked.
BSA II Operating Instructions 31
Commissioning
6.1.2 Dismounting the Power Plug Adapter
Procedure
t Press the grooved but-
ton from above and pull
back on the power plug
adapter.
t Push the power plug
adapter out of the pow-
er supply unit and re-
move it.
6.2 Connecting the Power Supply
Procedure
t
WARNING Severe injuries caused by using defec-
tive power supply cables! Check the power supply
cable for damage, e.g., cracks in the insulation.
t If required: Contact Sartorius Service.
t Check whether the country-specific power plug
matches the power supplies at the installation site.
t If required: Use country-specific power supply ca-
ble or replace country-specific power plug adapt-
er for power supply unit.
t NOTICE Damage to the device due to excessive in-
put voltage! Check whether the voltage specifica-
tions on the manufacturer’s ID label match those of
the power supply at the installation site.
t If the input voltage is too high: Do not connect
the device to the power supply.
t Contact Sartorius Service.
t Connect the right angle plug to the “Power Supply”
connection.
t Connect the mains plug to the wall outlet (supply
voltage) at the installation site.
y The [BOOTING] display is opened in the operating
display.
y The device performs a self-test.
6.3 Switching the Device On and
Off
Requirements
The device is connected to the power supply.
Procedure
t
WARNING Risk of injury from cuts due to broken
glass edges! Only operate the operating display with
your fingers. Do not use pointed or sharp objects.
t To switch the device on: Press the [On / Off] button.
t To switch the device off: Press and hold the [On /
Off] button.
32 BSA II Operating Instructions
System Settings
7 System Settings
7.1 Performing System Settings
Default settings can be adjusted for the device and the
applications in order to align with the ambient condi-
tions and individual operating requirements.
The following settings are necessary to operate the de-
vice together with connected components:
− Set up the communication of the connected devices
− Set up additional components
The following settings are recommended to set up the
device:
− Set the menu language
− Set date and time
− Set the calibration and adjustment
Procedure
t Press the [Menu] button.
t To adjust settings: Open the desired menu.
t Select and confirm the desired parameters (parame-
ters, see Chapter “4.6 Parameter List”, page 19).
t Exit the menu.
7.2 Setting the Calibration and
Adjustment
7.2.1 Setting Internal Calibration and
Adjustment (Only I-1x Models)
The following functions can be set for the internal cali-
bration and adjustment:
− Internal calibration with automatic start of the ad-
justment.
− Internal calibration with manual start of the adjust-
ment.
Procedure
t Open the “SETUP” / “BALANCE” menu. Call up the
“CAL./ADJ.” parameter and select the value “INT.
CAL.”.
t If the calibration function needs to be set with subse-
quent automatic adjustment: In the “SETUP” / “BAL-
ANCE” menu, for the “CAL.SEQ.“ parameter, select
the “ADJUST“ setting value.
t If the calibration function needs to be set without
subsequent automatic adjustment: In the “SET-
UP“ / “BALANCE“ menu, for the “CAL.SEQ.” parame-
ter, select the “CAL.-ADJ.“ setting value.
7.2.2 Setting the External Calibration and
Adjustment
The following functions can be set for the external cali-
bration and adjustment:
− External calibration with manual start of the adjust-
ment.
If this relates to a conformity-assessed de-
vice in legal metrology: External calibration
and adjustment is not possible.
Procedure
t Open the “SETUP“ / “BALANCE“ menu.
t If the calibration function needs to be set with subse-
quent automatic adjustment: For the “CAL.SEQ.“ pa-
rameter, select the “ADJUST“ setting value.
t If the calibration function needs to be set without
subsequent automatic adjustment: For the “CAL.
SEQ.“ parameter, select the “CAL./ADJ.“ setting val-
ue.
Setting the Weight Value for the External Weight
A preset weight value can be set for the external weight.
Procedure
t In the “SETUP“ / “BALANCE“ menu, for the “CAL./
ADJ.“ parameter, select the “EXT.CAL.“ setting value.