Manual_BSA_II_英文操作说明书.pdf - 第42页
42 BSA II Operating Instructions T echnical Data 15 T echnical Da ta 15.1 Dimensions for Devices with Analytical Draft Shield 5 6 4 3 9 2 1 7 8 Fig. 9: Device with analytical draft shield (side view and top view) P os. D…
BSA II Operating Instructions 41
Decommissioning
11 Decommissioning
11.1 Decommissioning the Device
Procedure
t Switch off the device.
t Disconnect the power plug from the socket (supply
voltage) at the installation site.
t If accessories are connected to the device: Discon-
nect the accessory from the device (see instructions
for the accessory).
12 Transport
12.1 Transporting the Device
Procedure
t
CAUTION Risk of injury when carrying the device!
t Use both hands to carry the device. To do this,
reach sideways under the device with both hands.
t Do not carry the device on the draft shield or the
control unit.
t Use suitable conveyance devices for long transport
routes.
13 Storage and
Shipping
13.1 Storing
Procedure
t Decommission the device.
t Store the device according to the ambient condi-
tions (see Chapter 15.4, page44).
13.2 Returning the Device and
Parts
Defective devices or parts can be returned to Sartorius.
Returned devices must be clean, decontaminated, and
properly packed, e.g. in the original packaging.
Transport damage as well as measures for subsequent
cleaning and disinfection of the device or parts by Sarto-
rius shall be charged to sender.
Devices contaminated with hazardous materials, e.g.,
harmful biological or chemical substances, will not be
accepted for repair or disposal.
Procedure
t Decommission the device.
t Contact Sartorius Service for instructions on how to
return devices or parts (see www.sartorius.com).
t Pack the device and the parts properly for return, e.g.
in the original packaging.
14 Disposal
14.1 Disposing of the Device and
Parts
The device and the device accessories must be disposed
of properly by disposal facilities.
A battery is installed inside the device. Batteries must be
disposed of properly by disposal facilities.
Many of the packaging materials are recyclable to con-
tribute to reducing global waste volumes.
Procedure
t Dispose of the device in accordance with local gov-
ernment regulations. Inform the disposal facility that
there is a lithium battery installed inside the device
(type see Chapter “15.9 Backup Battery”,
page 49).
t Dispose of the packaging in accordance with local
government regulations. Utilize local recycling op-
tions.
42 BSA II Operating Instructions
Technical Data
15 Technical Data
15.1 Dimensions for Devices with Analytical Draft Shield
5
6
4
3
9
2
1
7
8
Fig. 9: Device with analytical draft shield (side view and top view)
Pos. Description Unit Value
1 Usable height in weighing chamber mm 200
2 Maximum opening width of side door mm 115
3 Weighing pan size (diameter) for devices with analytical draft
shield, with readability 0.1 mg | 1 mg
mm 90 | 120
4 mm 150 ± 2
5 mm 9
6 mm 306 ± 2
7 mm 317 ± 2
8 mm 402 ± 2
9 mm 219 ± 2
BSA II Operating Instructions 43
Technical Data
15.2 Dimensions for Devices with Frame Draft Shield
4
3
2
1
1
Fig. 10: Device with analytical draft shield (side view and top view)
Pos. Description Unit Value
1 Weighing pan size (L × W) mm 182 ± 1
2 mm 219 ± 2
3 mm 94 ± 5
4 mm 317 ± 2
15.3 Weights
Devices with an-
alytical draft
shield, with read-
ability 0.1 mg
Devices with an-
alytical draft
shield, with read-
ability 1 mg
Devices with
frame draft
shield
Unit Value Value Value
Weight, including weighing pan and
associated components
Model 1x kg 5.9 5.9 4.3
Model I-1x kg 6.2 6.3 6.2