IPC-TM-650 EN 2022 试验方法1.pdf - 第360页
IPC-TM-650 Number Subject Date Revision Page 2 of 3
IPC-TR-483
Figure 1 All dimensions are in inches. Four
measurements are required as indicated. Locate
measuring points approximately 12.7mm [0.500 in] from
each edge in the fill direction, and 25.4 mm [1.00 in] from
each edge in the warp direction.
Page 1 of 3
IPC-TM-650
Number
Subject Date
Revision
Page 2 of 3
Figure 1 Specimen height versus temperature
IPC-TM-650
Number
Subject Date
Revision
Page 3 of 3