LmrXP142机械手册.pdf - 第39页

1. Changing the Conveyor Width Point The machine has a function that automatically changes the conveyor width by motor drive, in accordance with the production program being used. Procedure 1. At the [Main] screen, selec…

Part 2

Basic Operation

1. Changing the Conveyor Width . . . . . . . . .2-1-1

2. Changing the Position of the Back-up Pins

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2-1

3. Using the Maintenance Key . . . . . . . . . . . .2-3-1

This section explains the basic

machine operation procedures.

1. Changing the Conveyor Width

Point

The machine has a function that automatically changes the conveyor width by motor

drive, in accordance with the production program being used.

Procedure

1. At the [Main] screen, select [Production], then [Conveyor Width].

CAUTION

Before changing the conveyor width, ensure that there are

no back-up pins that may interfere with the adjustable rail.

2. If a production program has already been loaded, the program panel width is

displayed in the [Program Value] field. To change this value, select [Program

Value] to display a numerical keypad. To return to the production program value,

select [Set to Program Value].

3. Select [Move] and the START button flashes.

4. Push the START button to change the conveyor width to the specified value.

5. Select [OK].

6. Raise and lower the panel lifter to confirm that the back-up pins on the table do

not interfere with the conveyor rail.

Part 2 Chapter 1 Changing the Conveyor Width

Edition 3.0 2-1-1 XP-142E Mechanical Reference

Notes:

Part 2 Chapter 1 Changing the Conveyor Width

Edition 3.0 2-1-2 XP-142E Mechanical Reference