LmrXP142机械手册.pdf - 第76页

3. Replacing Consumable Parts 3.1 Replacing the Strobe Light Point Replace the strobe light if it fades or burns out. Take care when handling the strobe light because it is easily damaged. Procedure DANGER Turn off the p…

Notes:

Part 3 Chapter 2 Lubrication

Edition 3.0 3-2-16 XP-142E Mechanical Reference

3. Replacing Consumable Parts

3.1 Replacing the Strobe Light

Point

Replace the strobe light if it fades or burns out. Take care when handling the strobe light

because it is easily damaged.

Procedure

DANGER

Turn off the power to the machine at the main switch and

then wait 5 minutes before replacing the strobe light.

CAUTION

• When mounting the strobe light, avoid touching the

strobe light glass with your hands. Oil from hands can

shorten the life of the strobe light.

• Make sure that the harness connections are above the

strobe light connections when tightening the nuts.

• Ensure that the polarity of strobe light is correct when

connecting the terminals.

Part 3 Chapter 3 Replacing Consumable Parts

Edition 3.1 3-3-1 XP-142E Mechanical Reference

1. Remove the lock screws (four) shown below, then remove the light cover.

2. Loosen the nuts (three), then replace the strobe light.

Note: When mounting the strobe light, avoid touching the strobe light glass with your

hands. Oil from hands can shorten the life of the strobe light.

Strobe power unit

XP1MR201Ea

Nut

Holder

Lock screw

Strobe light

Light cover

Harness

Part 3 Chapter 3 Replacing Consumable Parts

Edition 3.1 3-3-2 XP-142E Mechanical Reference