LmrXP142机械手册.pdf - 第61页
Grease Gun Kit A grease gun kit with which grease supply for almost all Fuji equipment can be performed is available from Fuji. The grease gun kit comes with all the nozzles required to apply grease to the various grease…
2. Lubrication
Precautions During Lubrication
• Prior to beginning any lubrication, turn the main breaker to off.
• Apply an appropriate amount of lubricant. If too much lubricant is applied, it
may splatter and drop on boards inside the machine. Special care should be taken
to keep the camera lens clean for stable part inspection. Use a lens cleaner to keep
the lens clean.
Types of Lubricants
The lubricants that are used have the following characteristics.
Daphne Eponex No. 2
Biral T&D
Lithium grease by Idemitsu suited to mid/low speed parts.
Anticorrosive spray on oil suited to low speed, low load
parts.
Characteristics
T011E
Type
AFC Grease
High grade synthetic oil based on grease by THK suited to
high speed parts.
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-1 XP-142E Mechanical Reference
Grease Gun Kit
A grease gun kit with which grease supply for almost all Fuji equipment can be
performed is available from Fuji. The grease gun kit comes with all the nozzles required
to apply grease to the various grease fittings. To obtain the grease gun kit, please contact
your Fuji agent.
Included Parts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
GRSKIT02E
Name: Fuji grease gun kit
Code: AWPJ8201
FUJI Grease gun kit contents:
No. Name Code
Format
Quantity
1
2
3
4
5
6
7
8
9
10
11
12
Box Sheet
Sheet
Sheet
Mushroom Nipple
Grease Gun
Syringe
Rubber Hose
Air Hose
Nozzle
Nozzle
Nozzle
Nozzle
EA506J
PE light (Sponge)
Polyurethane
KH-120 (with HSP-1)
SJ-S30S
SPK-3C
TU0604B-310 mm
L-type
N-type
N-1-type
P-type
1
1
1
1
1
1
1
2
1
1
1
1
13
14
Nozzle
Tube
U-type
PTFE tube 2x3-150 mm
1
1
15
16
Connector
Connector Nipple
PN-1/8-PT1/8-BS
TS6-01
1
1
17 Sleeve 40-13
PJ
WPJ1271
WPJ1281
WPJ1261
K1153F
S2184A
H5456T
T2063H
N5004A
N5005A
N5006A
N5007A
N5008A
T2061E
K5030T
S2176B
S3084A 1
GRSKIT01E
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-2 XP-142E Mechanical Reference
Lubrication Instructions
The machine's lubrication points are shown in the following pages. Please refer to these
tables and illustrations when lubricating the machine.
1. Begin by checking the illustration for the lubrication points. White arrows indicate
surfaces that require greasing or oil. Black arrows indicate grease fittings, and
signify that grease should be applied using a grease gun.
Note: Even LM blocks that do not have a nipple can be lubricated by applying grease
between the block and the LM rail (bearing mechanism). The grease that adheres to
the ball bearings and rollers will be taken into the LM block, thereby lubricating the
LM block.
2. The symbols shown below are used in illustrations to indicate the location, type,
and schedule for lubrication.
✔: Apply an appropriate amount of lubricant.
R: Apply small amounts for rust protection.
N/A: Lubrication prohibited.
3. Lubrication should be performed in accordance with the "lubrication schedule"
indicated in the tables.
The schedule periods are as follows:
Every day: Lubricate every day (24 hours), regardless of the machine
operation time.
Every week: Lubricate every 7 days, regardless of the machine operation
time.
Every month: Lubricate every month, regardless of the machine operation
time.
Every 3 months: Lubricate every 3 months, regardless of the machine operation
time.
4. Use the checklist provided at the end of this chapter to verify that all lubrication
tasks have been performed.
LM rail
(1)
(2)
LM block
XP1ML002E
Example:
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-3 XP-142E Mechanical Reference