LmrXP142机械手册.pdf - 第8页
Body The information needed to understand the workings of the machine and how to perform maintenance is explained using text and illustrations. Page number A three digit hyphenated number appears in the footer on each pa…
Page Layout
Each page indicates the part number, chapter title, section title , manual name, page
number, and the edition number of the manual.
Part number
The part number to which each chapter belongs is shown on the header on each page.
Chapter number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more chapters.
Section title
Each chapter may be divided into several sections. The section number is composed of
the number of the chapter to which the section belongs, followed by a sequential number
for each section.
Manual name
XP1MF201E
Body
Edition number
Page number
Section title
Chapter number and title
Part number
1. Leveling the Machine
Point
Set leveling sheets in the positions shown below, and adjust the machine until it is level.
Ensure leveling sheets which conform to the board conveyance height are used.
Procedure
1. Position the leveling sheets according to the positions indicated below.
2. Position a pair of sprit levels on the base of the machine (vertical and horizontal
directions).
3. Adjust the height of each leveling bolt so that the machine is level and the
conveyance height is correct.
4. When you are satisfied that the machine is level, tighten the lock nuts to secure the
leveling position.
XP1MS001
(mm)
293 942 143 4141
5050 278624278
29038
Lock nut
Leveling bolt
Leveling sheet
Table01
Board conveyance height
Leveling sheet height
900
16
units (mm)
950
60
965
75
Part 6 Chapter 1 Leveling the Machine
Edition 2.0 6-1-1 XP-142E Mechanical Reference
About This Manual
Edition 3.0 ii XP-142E Mechanical Reference
Body
The information needed to understand the workings of the machine and how to perform
maintenance is explained using text and illustrations.
Page number
A three digit hyphenated number appears in the footer on each page. The first digit of
each page number indicates the part number, the second digit indicates the chapter
number within the part, and the final digit is the sequential page number within that
chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter
of part 1.
Manual name
The name of the manual that appears on the cover is also shown in the footer on each
page.
Edition number
The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after
the decimal point, for example, a change from edition 1.0 to 1.1. This
change is made on the revised pages only, and these pages can be
downloaded as required from Fuji's website.
Major revision: If major changes are made, the edition number is increased by one,
for example, a change from edition 1.0 to 2.0. This change is made on
all pages.
Note: The reference numbers at the bottom right of the illustrations are for administrative
purposes only, and are in no way connected to the content of the manual.
System-of-Units Used in This Manual & Conversion Rates
The system-of-units used in this manual, and the conversion rates to other unit systems
are given below.
Manual system-of-units
1 kg = 9.80665 Nkg
Remarks
Conversion to other unit system
Force
Manual system-of-units
1 N·m = 0.10197 kgf·m,
1 N·m = 10.19720 kgf·cm
N·m
Remarks
Conversion to other unit system
Torque
Manual system-of-units
–kPa
Remarks
Conversion to other unit system
Vacuum pressure
–1 kPa = –7.5 mmHg
Manual system-of-units
MPa
Remarks
Conversion to other unit system
Pressure
XP1MF202E
1 MPa = 10.19716 kgf/cm
2
About This Manual
Edition 3.0 iii XP-142E Mechanical Reference
Notes
About This Manual
Edition 3.0 iv XP-142E Mechanical Reference