LmrXP142机械手册.pdf - 第62页
Lubrication Instructions The machine's lubrication points are shown in the following pages. Please refer to these tables and illustrations when lubricating the machine. 1. Begin by checking the illustration for the …
Grease Gun Kit
A grease gun kit with which grease supply for almost all Fuji equipment can be
performed is available from Fuji. The grease gun kit comes with all the nozzles required
to apply grease to the various grease fittings. To obtain the grease gun kit, please contact
your Fuji agent.
Included Parts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
GRSKIT02E
Name: Fuji grease gun kit
Code: AWPJ8201
FUJI Grease gun kit contents:
No. Name Code
Format
Quantity
1
2
3
4
5
6
7
8
9
10
11
12
Box Sheet
Sheet
Sheet
Mushroom Nipple
Grease Gun
Syringe
Rubber Hose
Air Hose
Nozzle
Nozzle
Nozzle
Nozzle
EA506J
PE light (Sponge)
Polyurethane
KH-120 (with HSP-1)
SJ-S30S
SPK-3C
TU0604B-310 mm
L-type
N-type
N-1-type
P-type
1
1
1
1
1
1
1
2
1
1
1
1
13
14
Nozzle
Tube
U-type
PTFE tube 2x3-150 mm
1
1
15
16
Connector
Connector Nipple
PN-1/8-PT1/8-BS
TS6-01
1
1
17 Sleeve 40-13
PJ
WPJ1271
WPJ1281
WPJ1261
K1153F
S2184A
H5456T
T2063H
N5004A
N5005A
N5006A
N5007A
N5008A
T2061E
K5030T
S2176B
S3084A 1
GRSKIT01E
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-2 XP-142E Mechanical Reference
Lubrication Instructions
The machine's lubrication points are shown in the following pages. Please refer to these
tables and illustrations when lubricating the machine.
1. Begin by checking the illustration for the lubrication points. White arrows indicate
surfaces that require greasing or oil. Black arrows indicate grease fittings, and
signify that grease should be applied using a grease gun.
Note: Even LM blocks that do not have a nipple can be lubricated by applying grease
between the block and the LM rail (bearing mechanism). The grease that adheres to
the ball bearings and rollers will be taken into the LM block, thereby lubricating the
LM block.
2. The symbols shown below are used in illustrations to indicate the location, type,
and schedule for lubrication.
✔: Apply an appropriate amount of lubricant.
R: Apply small amounts for rust protection.
N/A: Lubrication prohibited.
3. Lubrication should be performed in accordance with the "lubrication schedule"
indicated in the tables.
The schedule periods are as follows:
Every day: Lubricate every day (24 hours), regardless of the machine
operation time.
Every week: Lubricate every 7 days, regardless of the machine operation
time.
Every month: Lubricate every month, regardless of the machine operation
time.
Every 3 months: Lubricate every 3 months, regardless of the machine operation
time.
4. Use the checklist provided at the end of this chapter to verify that all lubrication
tasks have been performed.
LM rail
(1)
(2)
LM block
XP1ML002E
Example:
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-3 XP-142E Mechanical Reference
2.1 Lubricating the XY-robot
Arrow marks in the illustration indicate lubrication points. Black arrows indicate points
where a grease gun is required.
XP1ML201a
(4)
(4)
(3)
(3)
(1)
(2)
Daphne Eponex No.2
✔
✔
✔
✔
T002Ea
Lubrication points
Schedule
1
2
3
4
Every 3 months
Every 3 months
Every 3 months
Every 3 months
✔ : Lubricate
Y-axis ball screw
X-axis ball screw
Y-axis LM
rails
X-axis LM
rails
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-4 XP-142E Mechanical Reference