LmrXP142机械手册.pdf - 第55页

2. Using the wiper fitted with the cleaning paper, clean the surfaces of the half mirror and the prism. CAUTION Do not press hard when cleaning the thin strobe light half mirror because it breaks easily. XP1MC215 Part 3 …

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-9 XP-142E Mechanical Reference

1.7 Cleaning the Strobe Light Half Mirror (Weekly)

Point

If oil and dust accumulate on the strobe light half mirror or prism surface, problems such

as with the light intensity and image distortion, will cause inspection errors.

Even the slightest dust must be cleaned off the surface of the half mirror or prism.

Procedure

WARNING

Cut power to the machine at the main switch before

attempting this procedure.

1. Get the cleaning kit ready.

Cleaning paper

XP1MC214E

2. Using the wiper fitted with the cleaning paper, clean the surfaces of the half mirror

and the prism.

CAUTION

Do not press hard when cleaning the thin strobe light half

mirror because it breaks easily.

XP1MC215

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-10 XP-142E Mechanical Reference

1.8 Cleaning the Strobe Light Unit (Every 3 Months)

Point

If oil and dust accumulate on the strobe light half mirror or prism surface, problems such

as with the light intensity and image distortion, will cause inspection errors.

Procedure

1. To clean the inside of the unit, first dismantle the strobe unit according to the

instructions in chapter 3, section 3.1 "Replacing the Strobe Light", and then clean

the strobe light (xenon) and holder.

XP1MC216E

Strobe light

Holder

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-11 XP-142E Mechanical Reference