LmrXP142机械手册.pdf - 第69页
Lubricating the Placing Head (Piston Pin, V acuum Pin and V acuum Cut Pin) Required Equipment • Fine brush for applying the lubricant • Flat brush for cleaning • Lighting (a lamp or flashlight) • Cloth Procedure 1. Remov…
Lubrication Checklist
Every 3 months
Every 3 months
Every 3 months
Every 3 months
Every month
Every month
Every 3 months
Every month
Every month
Every month
Every month
Every year
Every year
Every 6 months
Every month
Every month
Every month
Every month
T010Ec
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
✔
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
✔
✔
N/A
✔
✔
✔
✔
XY-robot
Placing head
Conveyor
Tape cutter
F-axis
G-axis
Y-axis ball screw
X-axis ball screw
Y-axis LM
rails
X-axis LM
rails
Z-axis ball screw
Spline shaft
Gears
Nozzle up/down guide
Piston pin
Vacuum pin
Vacuum cut pin
Ball screws
LM rails
Conveyor chain
Sliding parts of link arm
LM rails
Cam unit
Cam unit
✔ : Lubricate N/A : Do not lubricate
Lubrication points
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
✔
✔
✔
N/A
N/A
N/A
N/A
N/A
N/A
N/A
AFC
grease
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
N/A
N/A
N/A
N/A
Biral
T&D
Daphne
Eponex
No.2
Schedule
Check
Types of lubricant
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-9 XP-142E Mechanical Reference
Lubricating the Placing Head (Piston Pin, Vacuum Pin and
Vacuum Cut Pin)
Required Equipment
• Fine brush for applying the lubricant
• Flat brush for cleaning
• Lighting (a lamp or flashlight)
• Cloth
Procedure
1. Remove one or both of the MFUs to access the inside of the machine.
a. From the [Main] screen select [Manual Operation] - [Stage * MFU Unclamp],
and then press the START button.
b. Open the safety door and gently pull the MFU out.
c. Lock the casters of the removed MFU.
2. Pull the acrylic cover inside the machine diagonally up and out to remove it.
3. Push the placement head to the center of the machine to make lubricating the parts
easier.
Caution: Ensure that the placement head is pushed by the frame, and in particular do
not push the unit by the camera parts.
4. Before lubrication, check the movement of, and clean each piston.
a. Push the pusher to lower any one piston.
Note: After one piston is lowered, the other pistons can be pushed down by hand.
XP1ML205E
Pusher
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-10 XP-142E Mechanical Reference
b. Push each of the pistons down in turn to check that they retract smoothly.
Note any pistons that are not operating smoothly for cleaning and
lubrication. In particular, check for any build up of pollutants around the
guide, and clean as necessary.
Note: Not all pistons can be reached with a single piston lowered because the
pusher gets in the way. For example, with piston 1 lowered, pistons 7, 8 and
9 cannot be reached. In this case, lower piston 11 to check the movement of
pistons 1, 7, 8 and 9.
Cautions:
• Ensure that the pusher axis is rotated in unison with the revolver to prevent
excessive pressure between each pin and the pusher. Do not apply
sideward pressure to any pin.
• Do not touch the teeth of the gear to rotate the revolver. Instead use the
openings in the revolver to rotate it by finger.
XP1ML207E
Revolver
Pusher
Pin
Opening
Opening
XP1ML206E
Piston pin
Piston pin
Pusher
Guide
Part 3 Chapter 2 Lubrication
Edition 3.0 3-2-11 XP-142E Mechanical Reference