00197382-02_IM_SetupCenter6.3_EN.pdf - 第23页
Installation 4.2.3 Datalogic Scanner’s Cradle BC-8030-BT (Bluetooth) Hardware Installation Installation Manual SIPLACE Setup Center 6.3 23 Step 4 ► Click Next . Step 5 ► Read the license ag reement relating to use of th …
Installation
Hardware Installation 4.2.3 Datalogic Scanner’s Cradle BC-8030-BT (Bluetooth)
22 Installation Manual SIPLACE Setup Center 6.3
4.2.3.2
4.2.3.2 Connect cradle via USB
Connect cradle via USB
Installation of the USB-COM driver
Step 1
The installation packages for 32 bit and 64 bit operating systems are located in the “\3rdparty install
-
er\Datalogic\USB-COM Driver” directory of the Setup Center installation CD.
► Choose the appropriate installation package for your operating system.
Step 2
► Click Next.
Step 3
► The Select Installation Folder dialog box prompts you to enter the name of the folder in which the
software should be installed. The system suggests a default destination folder for you.
► However, you can click the Browse button to open a dialog box in which you can enter or select the
path you want to use. If the folder you specify does not exist, it is created after having accepted a
confirmation dialog.
► Select the option Everyone.
► Click Next.
Installation
4.2.3 Datalogic Scanner’s Cradle BC-8030-BT (Bluetooth) Hardware Installation
Installation Manual SIPLACE Setup Center 6.3 23
Step 4
► Click Next.
Step 5
► Read the license agreement relating to use of this software and select I Agree to accept the license
agreement.
► Click Next.
Step 6
► The installation of the driver software starts.
► The "Installation Complete" window appears if the installation has been completed successfully.
► Click Close.
Installation
Hardware Installation 4.2.4 Motorola 1D/2D barcode scanner
24 Installation Manual SIPLACE Setup Center 6.3
Steps to configure the cradle to the USB-COM interface
The device may be configured to a different interface ex factory, the following steps switch to USB-COM
port.
► Please scan the following barcodes in the order they are printed:
► Scan the “Link by Contact” – Barcode from the cradle and put the scanner into the cradle.
⇨ The scanner is now registered on the cradle.
► Scan the barcode "USB-COM" to set the interface to USB.
The cradle is now ready for use with Setup Center.
4.2.4
4.2.4 Motorola 1D/2D barcode scanner
Motorola 1D/2D barcode scanner
4.2.4.1
4.2.4.1 System Requirements
System Requirements
The following components are required for the operation of the scanner:
▪ WLAN-infrastructure (not included)
▪ Motorola scanner integrated in WLAN-infrastructure and accessible with "ping" windows-command.
▪ Required scanner firmware versions
– MC70: 05.43
– MC75: 02.37
– MC3090: 01.13
– MC3190: 03.26
NOTICE
The scanner might be delivered with a different firmware version. Please install the firmware
version listed above. It is located on the software DVD "SIPLACE Support Media DVD1” in the
section “SIPLACE Products” (See "4.2.4.3 Mobile Scanner Prerequisites Setup" [ ➙ 25]).
Please observe by all means the enclosed documentation.
NOTICE
Mobile scanner menus in Chinese
If you want the menus on the Motorola scanner to appear in Chinese, you first need to install a
localized (Simplified Chinese) operating system.