CP43维护手册.pdf.pdf - 第98页
Chapter 8 Board Conveyance Adjustment 8 – 2 V ersion 7.0 CP IV -3 Maintenance
8 – 1
Version 7.0
Chapter 8 Board Conveyance Adjustment
8. Board Conveyance Adjustment
The board in production is conveyed through the in conveyor, XY table and out
conveyor. Each unit is driven by a T type conveyor belt. Each unit has a buffer
facility for one board.
When the in conveyor and out conveyor are joined by raising the XY table to its
loading position, the width of all three can be changed at the same time by
turning the handle located on the out conveyor.
Fig. 8-1 Board Conveyance
CP IV-3 Maintenance
Chapter 8 Board Conveyance Adjustment
8 – 2
Version 7.0
CP IV-3 Maintenance
9 – 1
Version 7.0
Chapter 9 XY Table
9. XY Table
In addition to movements caused by the servo motors in the X and Y axes, the
XY table also moves vertically (via the Z axis motor) to adjust itself to the
height of the part being placed. The X and Y motors can move in increments of
0.01 mm. The Z motor moves in increments of 0.002 mm. The D axis moves in
increments of 0.0053 mm.
Fig. 9-1 Location of the X, Y and Z Servo motors
CP IV-3 Maintenance