雅马哈YSM切刀更换和保养方法..pdf - 第11页
Service Engineer Service Information SI0907002E - 003 = YS machine’s tape cu tter cleaning and lubrication 11 / 63 3. 2 T ape cutter units appearance Figure 7 Warning: If you mishandle t he tape cutter d uring the m aint…
Service Engineer
Service Information
SI0907002E-003=YS machine’s tape cutter cleaning and lubrication
10/63
Required materials
[Shim selection (Per Unit)]
Shim
Part name
Part number
Qty
Remarks
For previous-design
cutter (Feeder
banks with 24/60
feeder positions)
SHIM 0.05 HSR25
90990-30J074
2
For the linear guide bearings of
the Feeder bank with 24 feeder
positions (HSR25)
SHIM 0.1 HSR25
90990-30J075
2
SHIM 0.02
90990-30J073
6
For the lower blade
For new-design
cutter (Feeder
banks with 14/24/60
feeder positions)
SHIM 0.01 HSR20
90990-30J076
2/4
For the linear guide bearings of
the Feeder bank with 14/60
feeder positions (HSR20)
2 pcs for the feeder bank
with 14/24 feeder positions
4 pcs for the feeder bank
with 60 feeder positions
SHIM 0.02 HSR20
90990-30J077
2/4
SHIM 0.03 HSR20
90990-30J078
2/4
SHIM 0.05 HSR20
90990-30J079
2/4
SHIM 0.1 HSR20
90990-30J080
2/4
SHIM 0.02
60-BLADE
90990-30J081
3/6
For the lower blade
3 pcs for the feeder bank
with 14 feeder positions
6 pcs for the feeder bank
with 24/60 feeder positions
Table 2
Required document
Prepare “SI1109005E YS machine’s tape cutter blade replacement procedures” (to be released
soon) besides this document.
Service Engineer
Service Information
SI0907002E-003=YS machine’s tape cutter cleaning and lubrication
11/63
3.2 Tape cutter units appearance
Figure 7
Warning:
If you mishandle the tape cutter during the maintenance work, serious injuries may result. Please be
extremely careful and observe the maintenance procedures in this document precisely.
Should any tape cutter related fault occur, please contact your service representative or YAMAHA.
Damage induced as a result of the tape cutter maintenance by customers won’t be covered by
warranty.
For fixed feeder bank with
60 feeder positions
For fixed feeder bank with
14 feeder positions
For 24-feeder exchange
carriage / Fixed feeder bank
with 24 feeder positions
Service Engineer
Service Information
SI0907002E-003=YS machine’s tape cutter cleaning and lubrication
12/63