雅马哈YSM切刀更换和保养方法..pdf - 第27页

Service Engineer Service Information SI0907002E - 003 = YS machine’s tape cu tter cleaning and lubrication 27 / 63 Step 6 Remo ve the tape guide slope by removing the scr ew s t hat fasten the tape guide slope to the cut…

Service Engineer

Service Information

SI0907002E-003=YS machine’s tape cutter cleaning and lubrication

26/63

Step 4 Remove the tape guide slope by removing its fixing screws on the right and left sides

of it.

Note:

A washer is used on each fixing screw. Be careful not to lose the washer when removing the

fixing screw.

Figure 33

Step 5 Remove the air hose bypass of the tape guide slope.

Remove the air hose bypass from the bulkhead quick joint at the center of the tape guide

slope.

Note:

The previous-design machines do not have the air hose bypass. Skip this step for the

machines.

Figure 34

Fixing screws

Air hose bypass

Service Engineer

Service Information

SI0907002E-003=YS machine’s tape cutter cleaning and lubrication

27/63

Step 6 Remove the tape guide slope by removing the screws that fasten the tape guide slope

to the cutter unit.

Note:

A washer is used on each fixing screw. Be careful not to lose the washer when removing the

fixing screw.

Figure 35

Warning:

When the tape guide slope is removed, the cutter blade inside will be exposed. Please be extremely

careful not to get injured during the work.

Tape guide slope

Bulkhead quick joint

Air hose

Service Engineer

Service Information

SI0907002E-003=YS machine’s tape cutter cleaning and lubrication

28/63

3.4.4 Remove the Fixed feeder bank with 14 feeder positions (Only for YS24X)

For ease of service work, you can slide the sATSII away from the machine to make space for

the operator to work in.

Step 1 Move the keyboard and the mouse aside.

Loosen the fixing screws (2 pcs) of the keyboard bracket and rotate the keyboard bracket 90

degrees clockwise until it stops at the hook on the bracket base.

Figure 36

* By rotating the bracket 90 degrees, you can get inside the space between the cover and the sATSII.

Figure 37