XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第11页
Section title Each section contains text and figures for a specific procedure or set of information. Body The information needed to understand the workings of the machine and how to perform mainte- nance is explained usi…
How to Read This Manual
The information in this manual is generally arranged as shown below.
Chapter title
This is the title of the chapter.
Edition number
This manual is updated on a chapter-by-chapter basis. The edition numbers are revised when the
manual content is revised or updated. The edition number for the manual as a whole is found on
the front cover of the manual.
Important: This manual can be stored in a loose-leaf binder to allow easy replacement
or addition of pages. To keep your manual up-to-date at all times, check the
edition numbers against the numbers indicated in the table of contents. Any
additional or updated sections of this manual can be downloaded as required
from Fuji's website (http://www.fuji.co.jp).
Manual title
XP1S0001b
Body
Step
Edition numberChapter title
Page number
Notes
Setting the Production Mode
The machine has three modes of operation, “Production”, “Idle” and “Pass”.
These modes of operation have different purposes as is explained below.
Production This mode is used during assembly. Parts are picked up,
inspected, and placed on the panel.
Idle Idle mode is primarily used during machine adjustment and
testing.
When this mode is selected, the nozzle moves to the part
pick-up position, and an actual part pickup occurs. Feeders
should be removed from the MFU at this time in order to pre-
vent problems caused by stray parts which may be scattered
around the XY-table area.
Pass Pass mode is used when the machine is not used in current
production. In pass mode the machine simply acts as a con-
veyor, moving the panel on to the next machine in the line.
Procedure
1.
At the [Main] screen, press [Production] then [Automatic] to dis-
play the [Automatic] screen.
2.
Select the desired mode from the “Product”, “Idle”, “Pass” can-
didates at the upper right of the screen.
3.
Press [Close] to return to the [Main] screen.
Note: Refer to the host computer operation manual for the procedure on how to
transmit production programs.
3.1 Setting the Operation Mode
Chapter 3: Preparing for Production
TUT-XP142-1.0E
3-2 XP-142E Operator’
s Guide
Section title
About This Manual
TUT-XP142-1.1E
3XP-142E Operator’s Guide
Section title
Each section contains text and figures for a specific procedure or set of information.
Body
The information needed to understand the workings of the machine and how to perform mainte-
nance is explained using text and illustrations.
Step
Each procedure is broken down into several easy to follow steps.
Notes:
Notes provide useful or convenient information about the machine.
Page number
The number on each page is composed of two parts. The first digit is the chapter number, and the
page number within the chapter is shown after the hyphen.
Manual title
This is the title of the manual.
About This Manual
TUT-XP142-1.1E
4 XP-142E Operator’s Guide
Chapter 1
Machine Configuration
1.1 Component Names and Functions
TUT-XP142-1.1E
1-1XP-142E Operator’s Guide