XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第57页

Notes Chapter 7: Maintenance TUT -XP142-1.0E 7-10 XP-142E Operator ’s Guide

Point

Chip parts and other foreign objects will accumulate in the machine during

the course of operation. Such objects should be removed from the machine

periodically to keep the machine in good working order.

Procedure

WARNING

Turn off the main circuit breaker before performing

this procedure.

1. Use a brush or vacuum cleaner to remove the foreign objects from the

machine interior.

Caution: Do not use a compressed air blower to clean the machine interior, as

this can blow small parts and other foreign matter deeper into the

machine where they may impede operation.

2. Use a dry cloth to wipe grease off of all areas not specified as lubrication

points.

7.7 Cleaning the Machine Interior

(Every Week)

Chapter 7: Maintenance

TUT-XP142-1.0E

7-9XP-142E Operator’s Guide

Notes

Chapter 7: Maintenance

TUT-XP142-1.0E

7-10 XP-142E Operator’s Guide

Chapter 8

Production Support Functions

8.1 Setting the Production Start Sequence

8.2 Loading a New Panel

8.3 Unloading Panels

8.4 Panel Lifter Up/Down

8.5 Pass Mode Operation

TUT-XP142-1.1E

8-1XP-142E Operator’s Guide