XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第6页
Chapter 7: Maintenance TUT -XP142-1.0E 7.1 Emptying the W aste T ape Box <if so equipped> (Every 8 Hours) ................................................................7-2 7.2 Emptying the Parts Reject Box and T …
3.2 Production Programs............................................................3-7
Changing the Production Program ..............................................3-7
Setting the Scheduled Production Quantity ................................3-8
3.3 Part Settings......................................................................3-9
Setting the Feeders......................................................................3-9
Attaching the MFU ....................................................................3-10
Removing the MFU....................................................................3-10
3.4 The Machine....................................................................3-11
Nozzle Replacement..................................................................3-11
Changing the Conveyor Width ..................................................3-13
Settings for Automatic Changing of Conveyor Width during
Production..................................................................................3-13
Changing the Position of the Back-up Pins ..............................3-14
Chapter 4: Starting Production TUT-XP142-1.1E
4.1 Measurements and Checks Prior to Production ..............4-2
Feeder Information ......................................................................4-2
4.2 Starting Production............................................................4-3
Step Operation ............................................................................4-3
Automatic Operation....................................................................4-3
Chapter 5: Stopping the Machine TUT-XP142-1.1E
5.1 Stopping the Machine Temporarily....................................5-2
5.2 Resetting the Machine from the Cycle Stop Status..........5-2
5.3 Stopping the Machine in an Emergency ..........................5-2
5.4 Resetting the Machine from the Emergency Stop Status......5-3
Chapter 6: Finishing Production TUT-XP142-1.1E
6.1 Stopping Automatically Upon Completion
of the Scheduled Production Quantity..............................6-2
6.2 Stopping Automatically after Current Panel Is Completed......6-2
Table of Contents
TUT-XP142-1.1E
ii XP-142E Operator’s Guide
Chapter 7: Maintenance TUT-XP142-1.0E
7.1 Emptying the Waste Tape Box <if so equipped>
(Every 8 Hours) ................................................................7-2
7.2 Emptying the Parts Reject Box and Trays (Every Day)....7-3
7.3 Cleaning the Nozzle Interior (Every Week) ......................7-4
7.4 Cleaning the Gauge Chip Parts (Every Week) ................7-5
7.5 Cleaning the Vacuum Pump Filter (Every Week) ............7-6
7.6 Cleaning the Strobe Light Half Mirror and Prism Surface
(Every Week) ....................................................................7-8
7.7 Cleaning the Machine Interior (Every Week)....................7-9
Chapter 8: Production Support Functions TUT-XP142-1.1E
8.1 Setting the Production Start Sequence ............................8-2
8.2 Loading a New Panel........................................................8-2
8.3 Unloading Panels..............................................................8-3
8.4 Panel Lifter Up/Down........................................................8-3
8.5 Pass Mode Operation ......................................................8-4
Table of Contents
TUT-XP142-1.1E
iiiXP-142E Operator’s Guide
Notes
Table of Contents
TUT-XP142-1.1E
iv XP-142E Operator’s Guide